- Stainless steel
- comes with backing plate and front plate.
- powder coated in black
- OEM Number WKT100020
Body Protection
-
WKT100020 Defender Stainless Steel Fuel filter Guard Mud Shield TD5 90 / 110 / 130, these are prone to going rusty falling off or not being replaced by garage fitters. Essential to keep the filter safe from off Roading or green lane driving. These will also fit Disco 2 and defender TDCI with some light modification. -
-
Wildbear Bump Stop Extensions for defender or discovery, 1 x pair of 1" extensions. Manufactured in the UK to very high standard and shot blasted primed and powdercoated in wild bear silver to give a longer lasting protection. -
AFU1075 Wheel arch clip, these are 6mm plastic trim clips a perfect replacement for the land rover clips used to attach the plastic wheel arch surround or spat on the defender (1987 - 2006 ). The centre pin of the plastic clip is pushed through and expands to hold the fastener in place and keep the spat secure The clip is high quality alternative to the Land Rover original part. Land Rover Defender 90/110 (1987 - 2006 ) PACK OF 10 -
Treesliders Rocksliders Sill Footsteps Defender 110 – Pair COD: DUM0003 Hardy and comfortable Treeslider, with just one component you will have three major uses: Footsteps, Treeslider and Sill -
-
Spring Retainer kit Defender 90" A spring retainer kit consisting of front and rear heavy duty. comes with fixings and zinc coated and then powder coated. -
Spring Retainer kit Defender 110" A spring retainer kit consisting of front and rear heavy duty. comes with fixings and zinc coated and then powder coated. -
RACK MOUNT CLAMPS Code: SACS001 Single Single clamp > Anodized clamp - upper and lower sections > Protective rubbers - protects roll-cage finish > M8 stainless bolts and spring washers For mounting accessories such as a roof-rack, snorkel or aerial to your roll-cage. Suitable for any Safety Devices Expedition external roll-cage, as well as any other roll-cage which uses 45mm diameter tubing. The upper mounting hole is M8 threaded. -
-
SEAL glazing rubber windscreen Code: LR056278 -
> Safety Devices are the UK's original designers and manufacturers of roll cages and roof racks for Land Rover. Originally designed for the British Army and the Camel Trophy, today an extensive range of designs are available. > The quality is exceptional - cold drawn seamless steel, grit blasted, zinc primed and black powder coated roll cages and roof racks will stand up to the sort of challenges you expect your Land Rover to cope with. > Safety Devices offer design excellence, unrivalled quality and a huge choice. > Other Safety Devices roll cages are available - ask for details. More information and images can be found at www.safetydevices.com/expedition/products/roll-cages/ -
Out of stock
-
-
-
Rear Sill Channel Bracket Galvanized 347436 for Land Rover Defender Rear Sill Channel Bracket Galvanised For Land Rover 90 110 Defender Brand New Top Quality reproduction of Landrover part no. 347436 Laser cut and CNC bent made from 2mm steel and hot dip Galvanized, 100% accurate. Fits all Defenders 90,110,127,130 apart from the 110 5door station wagon. Very high quality OEM NUMBER 347436 -
REAR LAMP GUARD Code: DA4349 Round ABS plastic Reverse, Fog & NAS Single Defender - all models Protect those valuable lights from accidental damage either on or off-road! Add style and some protection to your Land Rover with this new product. This is a tough ABS plastic rear light guard for your Defender.These will not rust and you don't need to drill your car to fit these - fitted in seconds. They fit the fog and reversing light and the NAS (North American Spec) lights. -
Note - 45mm tube diameter, no diagonal, backstays to waist rail, includes front belt anchor points. Safety Devices are the UK's original designers and manufacturers of roll cages and roof racks for Land Rover. Originally designed for the British Army and the Camel Trophy, today an extensive range of designs are available. The quality is exceptional - cold drawn seamless steel, grit blasted, zinc primed and black powder coated roll cages and roof racks will stand up to the sort of challenges you expect your Land Rover to cope with. Safety Devices offer design excellence, unrivalled quality and a huge choice. -
Code: RBL2303SSSBLACKFull external style bar Black- Defender 90 - Hard Top with bulkhead, 2-door
- Defender 90 - Hard Top without bulkhead, 2-door
- Defender 90 - Station Wagon without bulkhead, 2-door
- Defender 90 - Station Wagon with bulkhead, 2-door
- Defender 110 - Hard Top, 2-door
- Defender 110 - Station Wagon, 4-door
- Defender 110 - Crew Cab/Double Cab Pick-up, 4-door
- Defender 130 - Station Wagon, 4-door
- Defender 130 - High Capacity Crew Cab Double Cab Pick-up, 4-door
Unrivalled quality...
Safety Devices are the UK's original designers and manufacturers of roll cages and roof racks for Land Rover. Originally designed for the British Army and the Camel Trophy, today an extensive range of designs are available. The quality is exceptional - cold drawn seamless steel, grit blasted, zinc primed and black powder coated roll cages and roof racks will stand up to the sort of challenges you expect your Land Rover to cope with. Safety Devices offer design excellence, unrivalled quality and a huge choice. Other Safety Devices roll cages are available - ask for details. More information and images can be found at Safety Devices Website -
-
-
-
-
-
-
-
-
-
A pack of 10 8mm black plastic, expanding rivets suitable for attaching the sill protectors on Land Rover Discovery Series 1 models. These rivets are also used for various other applications on other Land Rover models and may also be suitable for other makes of car. Applicable Models: Defender 1987>, 90/110. Discovery 1989 - 98 and 1998 - 04. Freelander 1996>. Range Rover Classic 1992 - 94. Range Rover P38 1995>. The Quality replacement parts, equivalent to Land Rover part number: 79086L To fit rivet snap of centre pin and push through main body. -
When suspention lift kits are fitted it increases the distance between the transfer box flange and the axle.The increased distance can cause the propshaft to run out of spline travel, Fitting this 40mm propshaft spacer helps return the shaft to its normal operating length therefore allowing full spline travel and prevents binding of the yokes.
Manufactured in the UK
Fits Land Rover Discovery 1 & 2,
Defender (all models), Range Rover Classic and P38
Kit includes:
1 x Matt BLACK Anodised Spacer
1 x kit of nut and bolts
-
Land rover defender twin drl bumper-stainless steel Made out of stainless steel then powder coated in Textured black to give a quality look. The LED lights are Ring and the holes they are put in have been machine pressed so the light is slightly counter sunk so not flush. This really does enhance your defender to a more modern look.- Stainless Steel
- Powder coated in textured black
- Ring Automotive lights
- Comes with instructions to wire up
-
Land rover defender twin drl bumper-Mild steel Made out of mild steel then powder coated in Textured black to give a quality look. The LED lights are Ring and the holes they are put in have been machine pressed so the light is slightly counter sunk so not flush. This really does enhance your defender to a more modern look.- Powder coated in textured black
- Ring Automotive lights
- Comes with instructions to wire up
- Mild Steel
-
DOOR HINGE KIT Code: DA1240SS Rear end door Zinc plated finish Set of 3 Defender - Puma fixings Series 2 Series 3 Defender 2007 onwards but can be used on earlier vehicles. Enhance your Land Rover's appearance! > Replacement zinc plated door hinges with stainless steel torx head bolts and all other fixings > Complete with stainless steel torx head bolt fixings -
Land Rover defender puma fibreglass bonnet, Defender fibreglass bonnet that comes with the extra ribs inside. these are aftermarket bonnet and you will need to do some preparation to the bonnet before fitting.- UK manufactured
- Extra Ribs on insde
- light weight
- very strong
- original looking
-
Sale!
Unlike many of the cheaper Nas steps out there this one does come with the tuv approved certificate to allow you to tow. Made by the same manufacturer for land rover you can be assured that this is a legal rear NAS step, powder coated in black and with the original tread step and all the fixings to allow you to fit. -
Land Rover Defender Light Weight Steering Guard Bolwer Used in the Defender Challenge, the lightweight steering guard will offer protection to steering arms and linkages, but also offers access for maintenance. Available in either Black or Graphite, it uses existing mounting points and both colours come with 2 x red towing eyes for recovery work.- Original Bolwer product
- Light weight
- Available in Black or Graphite
- 2 x Red towing eys
-
Wildbear Land Rover Defender Headlamp Guards . Made in the UK, available in Black, Silver and Grey. Manufactured from 4mm plate to provide tough protection from branches and stones, finished with a high quality texture powder coating over zinc treatment for increased durability. These guards not only look great, they really are the part you need to prevent cracked headlight mishaps. -
LAND ROVER DEFENDER FRONT TUBULAR SHOCK TURRETS (2) These tubular turrets are stronger and less liable to rusting than the original. (galvanised) *pair* This product fits: Land Rover Discovery 1 Land Rover Defender Range Rover Classic -
Landrover Defender Front Door Hinges. Designed and manufactured in the UK to outperform others on the market. These are CNC machined from Billets of Aerospace grade 6082-T6 aluminium. The hinge pins are made of stainless steel which are internally pinned to prevent unwanted removal or theft. The hinges also feature self lubricating graphite bushes to reduce friction and prevent wear. After machining and going through our strict quality control procedures these are anodised to a minimum of 30 microns. Supplied with high security stainless fixings & shims. -
this is a new aftermarket product to the range made to a very high quality. These tail gates bet battered when used daily so keep the appearance of your truck back to its original state. -
These chunky sidesteps not only look great but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Land Rover also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Land Rover.- QuickTread brand – made in the UK.
- Bolt on design, no drilling required. Fitted in minutes.
- Unique chassis clamps attach to chassis outriggers using one spanner
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive brushed stainless steel tread plate.
- Price is per pair.
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- QuickTread means quick fitting – only 5-10 minutes per side*
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
-
Land Rover Defender 110 side steps , Black powder coated with either rubber tread plate or silver chequer plate, these side steps are a great addition to your landy, easy to fit as uses existing mounts. manufactured in the UK to a high standard. -
Land Rover Defender 110 ‘Ebony’ side steps (‘Fire and Ice’ style with all black treadplate) These chunky ‘Ebony and Ivory’ sidesteps not only look great with an attractive brushed stainless steel tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 90 also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Land rover. If an unsightly LPG tank is fitted to your vehicle the sidestep can help to disguise it.selling points
- Bolt on design, no drilling required. Fitted in minutes.
- Unique chassis clamps attach to chassis outriggers using one spanner
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive brushed stainless steel tread plate.
- Price is per pair.
- Full fitting instructions with diagrams included
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- powder coating to enhance durability & wear.
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
-
A pair of extra heavy duty front spring retainers complete with bolts,washers and lock nuts. Zinc plated then powder-coated in silver. (Image is for cataloguing purposes) these are suitable for Defender Discovery 1 Range Rover Classic -
-
FRONT BUMPER WITH INTEGRATED LED LIGHTS Code: DA9500XS Includes rubber end caps Defender These smart and functional standard fit Defender bumpers are equipped with a pair of LED lights for additional lighting in the dark or day light running for safety. -
FRONT BUMPER WITH INTEGRATED LED LIGHTS Code: DA9500 Defender These smart and functional standard fit Defender bumpers are equipped with a pair of LED lights for additional lighting in the dark or day light running for safety. -
Front + Rear Mudflap kit For Land Rover Defender 90 TD5 & Puma Up To 2010 Mudflaps are prone to perishing overtime or getting trapped in the wheel and ripping off. With Genuine land rover mudflaps so expensive these aftermarket mudflaps not only look great but are a fraction of the cost of Land Rovers. these are sold as a set so you will get the 2 fronts and 2 rears.