-
BRITPART EXPEDITION ROOF RACK Code: DA3269 1.60m long x 1.50m wide Defender 110 Double cab pickup Defender 130 Double cab pickup Extremely strong, versatile and easy to use These Defender roof racks are manufactured from aluminium with a smart black powder coated finish. Fully welded, they are extremely strong, versatile and easy to use. The floor plank profiles are orientated longitudinally which results in a reduction in wind noise. There are nut channels on all the extrusions to allow for easy fitment of 3rd party accessories. > 3 feet per side > Weight - 27kgs > Vehicle gutter to top of rack - 265mm -
EXPEDITION ROOF RACK Code: DA3070 2.75m long x 1.50m wide Defender 110 Extremely strong, versatile and easy to use These Defender roof racks are manufactured from aluminium with a smart black powder coated finish. Fully welded, they are extremely strong, versatile and easy to use. The floor plank profiles are orientated longitudinally which results in a reduction in wind noise. There are nut channels on all the extrusions to allow for easy fitment of 3rd party accessories. > 4 feet per side > Weight - 38kgs > Vehicle gutter to top of rack - 265mm -
BRITPART EXPEDITION ROOF RACK Code: DA3072 2,050mm L x 1,500mm W Vehicle gutter to top of rack - 265mm 3 feet per side 32kg Defender 90 Extremely strong, versatile and easy to use These roof racks are manufactured from aluminium with a smart black powder coated finish. Fully welded, they are extremely strong, versatile, with a low profile and are easy to use. The floor plank profiles are orientated longitudinally which results in a reduction in wind noise. There are nut channels on all the extrusions to allow for easy fitment of 3rd party accessories. -
-
DEFENDER TUNING BOX Code: DA4507 Power increases by 27bhp (20kw) Torque increases by 71Nm Defender - Puma 2.2Tdci The 2011 onwards 2.2 Tdci model Defender has new style piezo injectors and requires specialised tuning solutions. It is currently not possible to remap the ECU through the OBD port. This substantial new tuning unit is designed to plug directly into the wiring loom and requires no modification to the vehicle. Contained in waterproof housing so can be safely located in the engine bay. -
Code: DA4368Heavy-duty Kit includes Plus 5" shock absorbers*- Defender 110 - from 1994 - wide bush
Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for!
Kit contents - > Springs - front & rear - pair > Britpart Cellular Dynamic Shock Absorbers - front & rear - pair > Radius arms - front & rear > Spring retainers - front & rear > Bush sets -
SHOCK ABSORBER & SPRING KIT Code: DA4287C Cellular Dynamic Heavy-duty 40mm lift Defender 110 Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for! Kit contents > Springs - front & rear - pair > Britpart Cellular Dynamic Shock Absorbers - front & rear - pair Shock Absorbers The Britpart Cellular Dynamic Shock Absorber represents a significant advance in Land Rover suspension systems.It features a cellular foam insert instead of a normal nitrogen gas or air, this is to stop the oil from boiling. The foam takes up less room which means more room for oil, 50% more, which offers maximum heat dispersion. This heat dispersion translates to a very subtle but controlled ride that will not fade no matter how hard you push them. They are ideal for a driver who needs more control to complement performance improvements or to enhance a standard vehicle. The unique design ensures ride comfort and cornering ability is maximised and of course they are superb off-road. > Cellular technology tube > Sintered 18mm rod > Reinforced welded mounts > Polyurethane bush > Single piece eye ring > Heavy-duty powder coating Coil Springs Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases. -
SHOCK ABSORBER & SPRING KIT Code: DA4287 Super Gaz Heavy-duty 40mm lift Defender 110 Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for! Kit contents > Springs - front & rear - pair > Britpart Super Gaz Shock Absorbers - front & rear - pair Shock Absorbers Britpart Super Gaz Shock Absorbers offer a 35mm bore tube filled with Fuchs shock absorber fluid, using the best seal available, single piece eye rings, polyurethane bush mounts and a very durable powder coated finish. These offer a vast improvement in ride quality and damping performance. Coil Springs Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases. -
SHOCK ABSORBER & SPRING KIT Code: DA4286HD Super Gaz Heavy-duty 40mm lift Defender 90 Discovery 1 Range Rover Classic Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for! Kit contents > Springs - front & rear - pair > Britpart Super Gaz Shock Absorbers - front & rear - pair Shock Absorbers Britpart Super Gaz Shock Absorbers offer a 35mm bore tube filled with Fuchs shock absorber fluid, using the best seal available, single piece eye rings, polyurethane bush mounts and a very durable powder coated finish. These offer a vast improvement in ride quality and damping performance. Coil Springs Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases.
-
LONG RANGE FUEL TANK Code: DA4546 Defender 110 - 1999 onwards (Td5 & Puma models) The best way of getting more fuel in to the vehicle without using valuable space or complex pumping systems. > Rear arch metal spare fuel tank > 45 litres > Right hand side > Supplied with all the necessary fittings as well as a replacement filler neck and specifically engineered bulkhead fitting for the balance pipe, having these makes the fitting of the tank quicker and easier as well as it working better too. Notes Not suitable for Defender 130. Additional bracket required for 7 seater. -
DOOR HINGE KIT Code: DA1131 Front row doors Natural aluminium finish Set of 4 Defender Series 3 Enhance your Land Rover's appearance! > Replacement aluminium door hinges with stainless steel hinge pins > Complete with stainless steel fixings -
DOOR HINGE KIT Code: DA1309 2nd row doors Natural aluminium finish Set of 4 Defender Series 3 Enhance your Land Rover's appearance! > Replacement aluminium door hinges with stainless steel hinge pins > Complete with stainless steel fixings. -
DOOR HINGE KIT Code: DA1305 Front row doors Anodised black finish Set of 4 Defender Series 3 Enhance your Land Rover's appearance! > Replacement anodised door hinges with stainless steel hinge pins > Complete with stainless steel fixings -
-
Fed up with winding your windows up and down?
Make life easier, add electric front windows to your Defender with this comprehensive kit. Includes fitting instructions. -
Code: DA1350BlackMade in the UK exclusive for Bowler, these lightweight, high strength wheels are TUV tested and are used in the Defender Challenge. They are 7.5" wide and will accept tyres ranging from 235 - 265 wide (including the standard 16" Land Rover options of Continental Cross Contacts or Goodyear MTR). Maximum load rating 1,250kg. -
Enhance your Defender's appearance!
Made from GRP (glass-reinforced plastic AKA fibreglass) this Defender Puma bonnet is half the weight of the original Land Rover bonnets. The bonnet has return edges on all four sides underneath for strength and to make it more rigid. It has strengthened hinge points and is supplied with stainless steel hinge-bolts & screws.Code: DA1963White- Defender 90 - 1984 onwards
- Defender 110 - 1983 onwards
-
SILICONE COOLANT HOSE KIT Code: DA4570 Coolant hose kit 3 piece kit Defender - 300Tdi > Quality silicone hoses are designed to operate at a higher temperature than the original hoses. > Will not rot or perish like rubber hoses. Important - Jubilee clips are NOT included with the kits -
Safari snorkels are manufactured to the highest standards in durable, UV stable, cross linked polyethylene material.
Pioneered in Australia in the early 1980’s, Safari Snorkels were born out of a need to protect 4WD engines from the hazards of dust and water commonly encountered in touring and off road applications. Safari snorkels are manufactured to the highest standards in durable, UV stable, cross linked polyethylene material, using stainless steel hardware where appropriate. Each system includes quality fixtures and fittings, which offer superior sealing, presentation and long-term durability. In arguably the best, if not toughest environment, Safari Snorkel Systems are thoroughly researched, tested and tooled for each model of Land Rover.The Safari Snorkel delivers a continuous and cooler supply of air for maximum engine performance. It is positively sealed as well to ensure the best protection against deep water crossings and dust. Note - Fitment from seated internal view. -
SWING AWAY REAR DOOR MOUNT SPARE WHEEL CARRIER Code: DA2274 With half door tailgate Defender -
TWIN SHOCK TURRETS Code: DA6322L 2” Lift Front Defender Discovery 1 Range Rover Classic Sometimes off-road conditions can be serious enough to test the standard equipment on your Land Rover to its maximum One of the critical components that takes most of the abuse is the suspension system. When using the standard single shock absorber configuration it is not unknown for the shock absorber to break the factory fitted turret mount. These shock absorber turrets from Britpart give you confidence that your vehicles suspension will tackle the terrain you take it through with greater ease. The single shock absorber turret is manufactured from heavy-duty steel and replaces the existing turret mount which is susceptible to corrosion by allowing a build up of dirt inside which is hard to clean thoroughly. The new design is harder wearing and easier to clean. The twin shock absorber turret is manufactured from the same quality steel as the single shock absorber turret but allows for the fitment of an additional shock absorber. The benefits of having extra shock absorbers fitted to your Land Rover is that any extreme force encountered is divided between the two shock absorbers for a more comfortable ride for you and your passengers. Using twin shocks is also beneficial when carrying loads both on and off-road as it improves the load carrying ability of the vehicle. An additional benefit is that when changing shock absorbers there is no need to remove the turrets. Note - Fitting shock absorber turrets may require some vehicle modification, please ask distributor for full details. -
SILICONE COOLANT HOSE KIT Code: DA4575 Coolant hose kit 5 piece kit Defender - 2.4Tdci - 2007 - 2012 > Quality silicone hoses are designed to operate at a higher temperature than the original hoses. > Will not rot or perish like rubber hoses. -
SILICONE TURBO HOSE KIT Code: DA3174B Intercooler hose kit 2 piece kit Defender - 2.4 Tdci Will not rot or perish > Quality silicone intercooler hoses designed to operate at a higher temperature then the original hoses. > Fits with both standard and performance intercoolers. > Will not rot or perish like standard rubber hoses. -
SILICONE TURBO HOSE KIT Code: DA4578 Intercooler hose kit 2 hose kit Defender - 2.2 - 2011 onwards Will not rot or perish > Quality silicone intercooler hoses designed to operate at a higher temperature then the original hoses. > Fits with both standard and performance intercoolers. > Will not rot or perish like standard rubber hoses. -
Enhance your Defender's look with a pair of these smart and robust side protectors. -
DOOR HINGE KIT Code: DA1070 Front row doors Torx head bolts Zinc plated finish Set of 4 Defender Series 3 Defender 2007 onwards but can be used on earlier vehicles. Enhance your Land Rover's appearance! > Replacement zinc plated door hinges with torx head bolts and all other fixings > Complete with torx head bolt fixings -
Code: DA4629Grey- Defender - except sunroof equipped models
Designed with CAD software.
> Supplied with interior lamp extension loom and DIN blanking panel. > Fitting kit and instructions are also supplied. The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines. The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product. It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts. Will the Defender roof console fit my vehicle? The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification. -
Code: DA4629BBlack- Defender - except sunroof equipped models
Designed with CAD software.
> Supplied with interior lamp extension loom and DIN blanking panel. > Fitting kit and instructions are also supplied. The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines. The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product. It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts. Will the Defender roof console fit my vehicle? The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification. -
BRITPART PERFORMANCE LIFTED SPRINGS Code: DA4208 Rear pair Lift - 50mm Load - 500kg Defender 110 Defender 130 Bar diameter - 21mm Rate - 420lbs/in Free height - 445mm The right choice when replacing the old sagging original springs! Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases. -
DOOR HINGE KIT Code: DA1275 2nd row doors Torx head bolts Zinc plated finish Set of 4 Defender Series 3 Defender 2007 onwards but can be used on earlier vehicles. Enhance your Land Rover's appearance! > Replacement zinc plated door hinges with torx head bolts and all other fixings > Complete with torx head bolt fixings -
New black mesh trim Defender 'Chubby' box Extra padded lid! Fitting a Britpart ‘Chubby’ box in your Land Rover will not only help you keep your vehicle clutter free but it will also make driving more of a pleasure with the extra padded lid. Our standard cubby boxes have a 20mm thick lid while the ‘Chubby’ boxes have a lovely thick and comfy 80mm thick lid. With a double cup holder as standard, split drinks are a thing of the past. Hand-built in the UK, these quality cubby boxes are suitable for Series 3 and Defenders. Well crafted with precision tools using a hard wearing leatherette outer with locking stay brass hinges. Top - Black mesh Body - Black For Defender For Series 3 -
EGR BLANKING & SILICONE HOSE KIT Code: DA1108TDI Kit contains - blue silicone hoses, EGR kit & Jubilee clips Defender - 300Tdi engine Discovery 1 - 300Tdi engine Range Rover Classic - 300Tdi engine Better fuel economy... Improved performance... A Britpart EGR (exhaust gas recirculation) blanking kit enables you to remove the original mechanical EGR from the vehicle resulting in better fuel economy and improved performance. Britpart silicone hoses are quality intercooler hoses designed to operate at a higher temperature then the original hoses. Fits with both standard and performance intercoolers. Will not rot or perish like standard rubber hoses.
Call Us Today! +6012-220 5085|sales@defenderupgrades.com.my
