-
-
OLD MAN EMU - STEERING DAMPER Code: DA8925 Defender Steering dampers with nitrogen charged foam cell for reduced wheel vibration and improved handling and control. Features > Massive 35mm bore. > 9 stage valving for optimum performance. > Stone guard. > Fits original mounts. > 50/50 valving. -
OLD MAN EMU HANDLING KIT Code: DA1740 Medium-duty full kit Defender 90 > Fully integrated Old Man Emu handling kits for all ride types > Designed and tested by a team of specialist engineers in Australia > Superior performance across all terrain > Dramatically improved high and low speed control for increased comfort Any suspension modification should have a full wheel alignment to ensure the vehicle is set Note - Kit lifts Defender from standard height to between 1" & 2" dependent on kit fitted (winch etc) -
OLD MAN EMU HANDLING KIT Code: DA2861 Medium-duty full kit Defender 110 > Fully integrated Old Man Emu handling kits for all ride types > Designed and tested by a team of specialist engineers in Australia > Superior performance across all terrain > Dramatically improved high and low speed control for increased comfort Any suspension modification should have a full wheel alignment to ensure the vehicle is set Note - Kit lifts Defender from standard height to between 1" & 2" dependent on kit fitted (winch etc) -
OLD MAN EMU SHOCK ABSORBER Code: DA8913 REAR PAIR Defender - 90 & 110 - heavy-duty Defender - 130 Discovery 1 - heavy-duty Range Rover Classic - heavy-duty Open length - 560mm Closed length - 346mm Nitrocharger Sport shock absorbers introduces advanced dual-stack deflective disc technology that continuously adapts to the terrain, offering rapid response improvements to ride quality, handling and control. Available in the UK only. Features > Interactive, multi-stacked rebound and compression valving systems ensure optimal damping performance in all conditions. > Vehicle specific fine tuning for superior handling and ride performance. > Piston rod ‘slip ring’ provides more consistent and uniform damping performance. > Triple lipped oil seal with gas retention check valve design virtually eliminates contaminant damage and gas loss. > Impact resistant polymer dirt shield. > Balanced, 35mm Teflon banded piston assembly. > Teflon coated low friction glacier piston rod guide. > 18-25mm induction hardened chrome piston rod. > High quality replacement mounting bushes. > Australian made and engineered. Lower Bush Mount Kit - DA6806 -
OLD MAN EMU SHOCK ABSORBER Code: DA8921 Rear Defender - 90 & 110 Discovery 1 Range Rover Classic Open length - 560mm Closed length - 346mm Nitrocharger Sport shock absorbers introduces advanced dual-stack deflective disc technology that continuously adapts to the terrain, offering rapid response improvements to ride quality, handling and control. Available in the UK only. Features > Interactive, multi-stacked rebound and compression valving systems ensure optimal damping performance in all conditions. > Vehicle specific fine tuning for superior handling and ride performance. > Piston rod ‘slip ring’ provides more consistent and uniform damping performance. > Triple lipped oil seal with gas retention check valve design virtually eliminates contaminant damage and gas loss. > Impact resistant polymer dirt shield. > Balanced, 35mm Telfon banded piston assembly. > Teflon coated low friction glacier piston rod guide. > 18-25mm induction hardened chrome piston rod. > High quality replacement mounting bushes. > Australian made and engineered. Lower Bush Mounting Kit - DA6806
-
OLD MAN EMU COIL SPRINGS Code: DA8922 Rear Lift - Up to 50mm Defender - 110 Defender - 130 Spring rate - 300lbf/in / 52N/mm Free height - 435mm Defender - 110. Load - 300kgs Defender - 130. Load - light load > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution - Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils. Important DA8922 has reduced spring rate from OE to provide improved ride quality for light loads -
OLD MAN EMU COIL SPRINGS D110 Code: DA6841 Rear Lift - Up to 40mm Defender 110 - Station Wagon Spring rate - 175/200lbf/in / 31/35N/mm Free height - 440mm Defender - 110. Load - Station Wagon > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils. -
OLD MAN EMU COIL SPRINGS Code: DA8923 Rear Lift - Up to 55mm Defender - 110 Defender - 130 Spring rate - 420lbf/in / 74N/mm Free height - 435mm Defender - 110. Load - 500kgs Defender - 130. Load - 400kgs > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
-
OLD MAN EMU SHOCK ABSORBER Code: DA8911 Front PAIR Defender - 90, 110 & 130 Discovery 1 Range Rover Classic Open length - 553mm Closed length - 329mm Nitrocharger Sport shock absorbers introduces advanced dual-stack deflective disc technology that continuously adapts to the terrain, offering rapid response improvements to ride quality, handling and control. Available in the UK only. Features > Interactive, multi-stacked rebound and compression valving systems ensure optimal damping performance in all conditions. > Vehicle specific fine tuning for superior handling and ride performance. > Piston rod ‘slip ring’ provides more consistent and uniform damping performance. > Triple lipped oil seal with gas retention check valve design virtually eliminates contaminant damage and gas loss. > Impact resistant polymer dirt shield. > Balanced, 35mm Teflon banded piston assembly. > Teflon coated low friction glacier piston rod guide. > 18-25mm induction hardened chrome piston rod. > High quality replacement mounting bushes. > Australian made and engineered. Upper & Lower Bush Mount Kit - DA6805 -
OLD MAN EMU COIL SPRINGS Code: DA8924 Front Lift - Up to 40mm Defender - 90 - diesel Discovery 1 Range Rover Classic Spring rate - 285lbf/in / 50N/mm Free height - 385mm Load - 51 - 110kgs > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
-
OLD MAN EMU COIL SPRINGS Code: DA8910 Front Lift - Up to 40mm Defender - 90, 110 & 130 - diesel Defender - 90, 110 - petrol Discovery 1 - diesel Range Rover Classic - diesel Spring rate - 225lbf/in / 39N/mm Free height - 390mm Defender - 90, 110 & 130 - diesel. Load - 50kgs Defender - 90, 110 - petrol. Load - 51 - 110kgs Discovery 1 - diesel. Load 50kgs Range Rover Classic - diesel. Load - 50kgs > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
-
OIL FILLER CAP Code: DA8891 Anodised aluminium Defender - Tdci -
NEBULA 12V LED STRIP LIGHT Code: DA1452 500mm With switch > Long life, high intensity LEDs > Quick to install > Compact design > Robust construction > Unique impact deflection design > E-type approved The Nebula incorporates the Orizon LED strip light, which uses the latest in LED technology, offering optimum performance and extended life. The properties of these LEDs give greater luminosity, allowing for a brighter unit whilst using fewer LEDs to maintain the low power draw. Set in a low profile, tough aluminium housing, the Nebula is quick and easy to install, making it suitable for both new vehicle specifications and retrofitting into existing vehicles. Voltage range (VDC) - 10 - 14 Average current (A) - 0.44 Light output (Im) - 640 Watts (W) - 6 Size (L x W x H mm) - 624 x 44 x 14 Temp. range (ºC) - -30 to +40 IP rating (IP) - IP60 -
-
-
-
-
-
MOMO 36 SPLINE BOSS Code: DA5734 slimline boss, measuring only 32mm in depth. Made from single billet aluminium, black anodized, this 36 spline boss also fits all 2015 models. ? Please note the momo horn button will no longer fit due to this being so slim. ?The boss is supplied with screws and pins to cancel the indicators, you do not need to use the pins on 2015 models. -
-
-
-
-
-
-
LONG TRAVEL REAR SHOCKER ABSORBER MOUNTING KIT Code: DA6337 Defender Discovery 1 Range Rover Classic Laser cut, jigged and computer welded with zinc plated and powder coated finish The standard pin and eye shock absorbers don't have the necessary articulation for extreme off-road conditions and the answer is to use pin and pin shock absorbers. If you use our Cellular Dynamic Plus 5" shock absorbers (DC6000LL) they offer better articulation. Note - On Defender Td5 the fuel filter must be moved. -
LONG RANGE FUEL TANK SEAT BELT BRACKET Code: DA4546KIT Tank DA4546 will require this additional bracket when fitting to a Defender 7-seat. -
LONG RANGE FUEL TANK Code: DA4546 Defender 110 - 1999 onwards (Td5 & Puma models) The best way of getting more fuel in to the vehicle without using valuable space or complex pumping systems. > Rear arch metal spare fuel tank > 45 litres > Right hand side > Supplied with all the necessary fittings as well as a replacement filler neck and specifically engineered bulkhead fitting for the balance pipe, having these makes the fitting of the tank quicker and easier as well as it working better too. Notes Not suitable for Defender 130. Additional bracket required for 7 seater. -
-
-
LED SIDE REPEATERS Code: DA8530 Clear Pair Defender - Td5 onwards
Call Us Today! +6012-220 5085|sales@defenderupgrades.com.my
