• SINGLE SHOCK TURRETS Code: DA6323L 2” Lift Front Defender Discovery 1 Range Rover Classic Sometimes off-road conditions can be serious enough to test the standard equipment on your Land Rover to its maximum One of the critical components that takes most of the abuse is the suspension system. When using the standard single shock absorber configuration it is not unknown for the shock absorber to break the factory fitted turret mount. These shock absorber turrets from Britpart give you confidence that your vehicles suspension will tackle the terrain you take it through with greater ease. The single shock absorber turret is manufactured from heavy-duty steel and replaces the existing turret mount which is susceptible to corrosion by allowing a build up of dirt inside which is hard to clean thoroughly. The new design is harder wearing and easier to clean. The twin shock absorber turret is manufactured from the same quality steel as the single shock absorber turret but allows for the fitment of an additional shock absorber. The benefits of having extra shock absorbers fitted to your Land Rover is that any extreme force encountered is divided between the two shock absorbers for a more comfortable ride for you and your passengers. Using twin shocks is also beneficial when carrying loads both on and off-road as it improves the load carrying ability of the vehicle. An additional benefit is that when changing shock absorbers there is no need to remove the turrets. Note - Fitting shock absorber turrets may require some vehicle modification, please ask distributor for full details.
  • BRITPART PERFORMANCE LIFTED SPRINGS Code: DA4206 Rear pair Lift - 40mm Load - 100kg Defender 110 Bar diameter - 17mm Rate - 270-295lbs/in Free height - 445mm The right choice when replacing the old sagging original springs! Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases.
  • DYNAMAT XTREME SOUND DEADENING KIT Code: DA8076 Dynamat Xtreme sheet - ( BOX WITH 9 SHEETS ) EACH SHEET SIZE - 1.200 x 610mm Use it on your doors, floor, roof, bonnet and loadspace. Dynamat Xtreme is the highest efficiency sound deadening material available and the most effective product for stopping noise and vibration. Dynamat Xtreme can be used on any and all interior sheet metal and fibreglass body panels. The aluminium constraining layer is very moldable and conforms easily to all interior surfaces. The patented extra sticky butyl layer is formulated with VECTOR chemistry for the most amazing energy conversion capabilities ever. Use it on your doors, floor, roof, bonnet and loadspace for a quiet, cool and incredibly solid ride. > Create a solid, luxury car feel with a reduction in road noise. > Stop resonance & vibrations, reduces buzzes & rattles. > Improved sound. Get more bass. Hear more of your music. > For use throughout your vehicle interior, the first step to an improved Land Rover. DEFENDER UPGRADES MALAYSIA are pleased to be the official Dynamat distributor in the Land Rover aftermarket.
  • ROOF CROSS RAIL Code: DA4711 Explorer roof rack Gutter mount 4kgs Defender 90 - hard top & station wagon Defender 110 - hard top & station wagon Defender 110 - double cab/crew cab pick-up Defender 130 - double cab/crew cab pick-up Additional roof cross rails for use without a roof rack for use as, for example, a roof bar, basic tent support, attaching a roof storage box or to spread additional load on the Safety Devices' roof rack. Refer to owners handbook for recommended maximum weight.
  • STAINLESS STEEL DOOR THRESHERS Code: DA4793 Front & 2nd row door threshers For vehicles without sill seat belt mounts Defender - from 1983 onwards Series 2 & 3 These stainless steel door threshers will freshen up the inside of your Land Rover as this is an area is which can get very scruffy. All of the existing holes on the sills line up with these doors threshers so they are a quick, easy bolt on project. The door threshers are made from stainless steel 304 grade bright annealed 1.5mm thick and are laser cut and CNC pressed. Stainless steel fixings are supplied. Note - If your door seal is fitted to your sill rail, you may need to modify the sill rail.
  • EGR BLANKING & SILICONE HOSE KIT Code: DA1108TDI Kit contains - blue silicone hoses, EGR kit & Jubilee clips Defender - 300Tdi engine Discovery 1 - 300Tdi engine Range Rover Classic - 300Tdi engine Better fuel economy... Improved performance... A Britpart EGR (exhaust gas recirculation) blanking kit enables you to remove the original mechanical EGR from the vehicle resulting in better fuel economy and improved performance. Britpart silicone hoses are quality intercooler hoses designed to operate at a higher temperature then the original hoses. Fits with both standard and performance intercoolers. Will not rot or perish like standard rubber hoses.
  • BRITPART PERFORMANCE LIFTED SPRINGS Code: DA4205 Rear pair Lift - 50mm Load - 200kg Defender 90 Discovery 1 Discovery 2 Range Rover Classic Bar diameter - 19mm Rate - 360lbs/in Free height - 430mm The right choice when replacing the old sagging original springs! Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases.
  • DOOR HINGE KIT Code: DA1275 2nd row doors Torx head bolts Zinc plated finish Set of 4 Defender Series 3 Defender 2007 onwards but can be used on earlier vehicles. Enhance your Land Rover's appearance! > Replacement zinc plated door hinges with torx head bolts and all other fixings > Complete with torx head bolt fixings
  • SAFETY DEVICES ROLL CAGE PADDING KIT Code: RBL1387PAD Black Defender 90 - Station Wagon without bulkhead, 2-door Padding kit for internal section of RBL1387SSS roll cage Unrivalled quality... Specially formulated polyurethane flame retardant padding kits of 55 Shore hardness. Kit covers all internal roll cage components above shoulder height.
  • BRITPART PERFORMANCE LIFTED SPRINGS Code: DA4208 Rear pair Lift - 50mm Load - 500kg Defender 110 Defender 130 Bar diameter - 21mm Rate - 420lbs/in Free height - 445mm The right choice when replacing the old sagging original springs! Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases.
  • DOG GUARD Code: DA4027 Half height Mesh type Grey Defender 90 - 1987 - 2006 & 2007 onwards - hardtop with bulkhead Defender 110 - 1987 - 2006 & 2007 onwards - hardtop with bulkhead Series - hardtop with bulkhead Keep Rover in his place!
  • OLD MAN EMU COIL SPRINGS Code: DA8924 Front Lift - Up to 40mm Defender - 90 - diesel Discovery 1 Range Rover Classic Spring rate - 285lbf/in / 50N/mm Free height - 385mm Load - 51 - 110kgs > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
  • OLD MAN EMU COIL SPRINGS Code: DA8910 Front Lift - Up to 40mm Defender - 90, 110 & 130 - diesel Defender - 90, 110 - petrol Discovery 1 - diesel Range Rover Classic - diesel Spring rate - 225lbf/in / 39N/mm Free height - 390mm Defender - 90, 110 & 130 - diesel. Load - 50kgs Defender - 90, 110 - petrol. Load - 51 - 110kgs Discovery 1 - diesel. Load 50kgs Range Rover Classic - diesel. Load - 50kgs > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
  • OLD MAN EMU COIL SPRINGS Code: DA8922 Rear Lift - Up to 50mm Defender - 110 Defender - 130 Spring rate - 300lbf/in / 52N/mm Free height - 435mm Defender - 110. Load - 300kgs Defender - 130. Load - light load > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution - Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils. Important DA8922 has reduced spring rate from OE to provide improved ride quality for light loads
  • OLD MAN EMU COIL SPRINGS D110 Code: DA6841 Rear Lift - Up to 40mm Defender 110 - Station Wagon Spring rate - 175/200lbf/in / 31/35N/mm Free height - 440mm Defender - 110. Load - Station Wagon > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
  • RED SEAT BELT Code: DA5057 Front Equivalent to BTR6563 Defender - station wagon Add a splash of colour to your Defender’s interior by fitting a set of these red seat belts. Type approved.
  • 2" LIFT REAR RADIUS ARM Code: DA5510 Defender Discovery 1 Range Rover Classic Help contribute to a much better off-road capability > Designed for vehicles with an extended 1 to 3” lift. > Front radius arms correct castor alignment which in turn ensures safe driving. > Rear radius arms provide full rear axle articulation. > Fitting the radius arms will contribute to much better off-road capability for your vehicle by fully utilising your spring and shock absorber set. > Zinc passivated with a heavy-duty powder coating finish to complement each component and the Britpart coil springs.
  • DOOR HINGE KIT Code: DA1070 Front row doors Torx head bolts Zinc plated finish Set of 4 Defender Series 3 Defender 2007 onwards but can be used on earlier vehicles. Enhance your Land Rover's appearance! > Replacement zinc plated door hinges with torx head bolts and all other fixings > Complete with torx head bolt fixings
  • Enhance your Defender's look with a pair of these smart and robust side protectors.
  • SILICONE TURBO HOSE KIT Code: DA4578 Intercooler hose kit 2 hose kit Defender - 2.2 - 2011 onwards Will not rot or perish > Quality silicone intercooler hoses designed to operate at a higher temperature then the original hoses. > Fits with both standard and performance intercoolers. > Will not rot or perish like standard rubber hoses.