Body Protection
-
A pack of 10 8mm black plastic, expanding rivets suitable for attaching the sill protectors on Land Rover Discovery Series 1 models. These rivets are also used for various other applications on other Land Rover models and may also be suitable for other makes of car. Applicable Models: Defender 1987>, 90/110. Discovery 1989 - 98 and 1998 - 04. Freelander 1996>. Range Rover Classic 1992 - 94. Range Rover P38 1995>. The Quality replacement parts, equivalent to Land Rover part number: 79086L To fit rivet snap of centre pin and push through main body. -
AFU1075 Wheel arch clip, these are 6mm plastic trim clips a perfect replacement for the land rover clips used to attach the plastic wheel arch surround or spat on the defender (1987 - 2006 ). The centre pin of the plastic clip is pushed through and expands to hold the fastener in place and keep the spat secure The clip is high quality alternative to the Land Rover original part. Land Rover Defender 90/110 (1987 - 2006 ) PACK OF 10 -
New LH rear body corner capping which fits all 90/110 Defender models from 1994 onwards. Body corner capping ALR9103 is supplied in black powder coat manufactured in the UK. For other side or a pair please see other listings Previous part numbers ALR9103 AQL710030 AQL710031 AQL710250 -
New RH rear body corner capping which fits all 90/110 Defender models from 1994 onwards. Body corner capping ALR9104 is supplied in black powder coat manufactured in the UK. For other side or a pair please see other listings. Previous part numbers ALR9104 AQL710020 AQL710021 AQL710240
-
New RH & LH rear body corner capping which fits all 90/110 Defender models from 1994 onwards. Body corner capping ALR9104 & ALR9103 is supplied in black powder coat manufactured in the UK. For other side or a pair please see other listings. Previous part numbers ALR9104 AQL710020 AQL710021 AQL710240 ALR9103 AQL710030 AQL710031 AQL710250 -
Code: RBL2303SSSBLACKFull external style bar Black- Defender 90 - Hard Top with bulkhead, 2-door
- Defender 90 - Hard Top without bulkhead, 2-door
- Defender 90 - Station Wagon without bulkhead, 2-door
- Defender 90 - Station Wagon with bulkhead, 2-door
- Defender 110 - Hard Top, 2-door
- Defender 110 - Station Wagon, 4-door
- Defender 110 - Crew Cab/Double Cab Pick-up, 4-door
- Defender 130 - Station Wagon, 4-door
- Defender 130 - High Capacity Crew Cab Double Cab Pick-up, 4-door
Unrivalled quality...
Safety Devices are the UK's original designers and manufacturers of roll cages and roof racks for Land Rover. Originally designed for the British Army and the Camel Trophy, today an extensive range of designs are available. The quality is exceptional - cold drawn seamless steel, grit blasted, zinc primed and black powder coated roll cages and roof racks will stand up to the sort of challenges you expect your Land Rover to cope with. Safety Devices offer design excellence, unrivalled quality and a huge choice. Other Safety Devices roll cages are available - ask for details. More information and images can be found at Safety Devices Website -
> Safety Devices are the UK's original designers and manufacturers of roll cages and roof racks for Land Rover. Originally designed for the British Army and the Camel Trophy, today an extensive range of designs are available. > The quality is exceptional - cold drawn seamless steel, grit blasted, zinc primed and black powder coated roll cages and roof racks will stand up to the sort of challenges you expect your Land Rover to cope with. > Safety Devices offer design excellence, unrivalled quality and a huge choice. > Other Safety Devices roll cages are available - ask for details. More information and images can be found at www.safetydevices.com/expedition/products/roll-cages/ -
Note - models between 1983 - 1988 had three raised ribs on the roof approx 22mm (7/8") tall. This kind of roof does not work with our external roll cages as the hoops will clash with them. Safety Devices are the UK's original designers and manufacturers of roll cages and roof racks for Land Rover. Originally designed for the British Army and the Camel Trophy, today an extensive range of designs are available. The quality is exceptional - cold drawn seamless steel, grit blasted, zinc primed and black powder coated roll cages and roof racks will stand up to the sort of challenges you expect your Land Rover to cope with. Safety Devices offer design excellence, unrivalled quality and a huge choice. -
Note - 45mm tube diameter, no diagonal, backstays to waist rail, includes front belt anchor points. Safety Devices are the UK's original designers and manufacturers of roll cages and roof racks for Land Rover. Originally designed for the British Army and the Camel Trophy, today an extensive range of designs are available. The quality is exceptional - cold drawn seamless steel, grit blasted, zinc primed and black powder coated roll cages and roof racks will stand up to the sort of challenges you expect your Land Rover to cope with. Safety Devices offer design excellence, unrivalled quality and a huge choice. -
-
-
Defender 110 ‘Fire and Ice’ style ‘Ebony and Ivory’ side steps, These chunky ‘Ebony and Ivory’ (‘Fire and Ice’ style) sidesteps not only look great with an attractive brushed stainless steel tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 90 also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Land rover. If an unsightly LPG tank is fitted to your vehicle the sidestep can help to disguise it.- Bolt on design, no drilling required. Fitted in minutes.
- Unique chassis clamps attach to chassis outriggers using one spanner
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive brushed stainless steel tread plate.
- Price is per pair.
- Full fitting instructions with diagrams included
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- powder coating to enhance durability & wear.
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
-
Protect your sills with these Defender 110 Tube Rock Sliders made from 76mm x 3.2mm Tube, Galvanised and powder-coated in textured Black. Made in the UK to a very high standard, Comes with all fixings. -
Defender 110 Crew Cab/side steps with chequer tread plate. These chunky sidesteps not only look great with an attractive checkerplate tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 110 crewcab also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Land Rover.- QuickTread brand – made in the UK.
- Bolt on design, no drilling required. Fitted in minutes.
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive checkerplate tread plate.
- Price is per pair.
- Full fitting instructions with diagrams included.
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- QuickTread means quick fitting – only 10-15 minutes per side*
- All Defender side steps have the option for zinc coating under the black powder coating to enhance durability & wear.
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
-
Defender 110 (1985 onwards) chunky XS style side steps Available in Black chequer Tread plate or Silver Tread plate, select option when proceeding to checkout, For Piano style please see other listings. Also available in 90/110/130 These chunky XS sidesteps not only look great powder coated and topped with an attractive checker plate tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 90 also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Land rover.- Quick Tread brand – made in the UK.
- Bolt on design, no drilling required. Fitted in minutes.
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive checkerplate tread plate.
- Price is per pair.
- Full fitting instructions with diagrams included
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- QuickTread means quick fitting – only 5-10 minutes per side*
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
-
Defender 110 sill chequer plate 3 door made by the same supplier as land rover. these come with the gaskets and fixing kits, The 3M Chequer plate with the 5 bar pattern is to a high quality. -
Defender 110 sill chequer plate 5 door made by the same supplier as land rover. these come with the gaskets and fixing kits, The 3M Chequer plate with the 5 bar pattern is to a high quality. -
Defender 90" Rear Spring Retainers Heavy Duty -
Defender 90 rear quarters chequer plate, Very high quality 3mm thick made by the OEM manufacturer and comes with all the fixings and the Foam gaskets. -
Another quality designed and manufactured product by IRB developments These simple yet clever brackets increase the angle of the 2nd row door opening on all Land Rover Defender 110 Station Wagon and 110/130 Double-Cab models. With the brackets fitted, the 2nd row doors will now open to almost 90-degrees, greatly improving passenger entry and egress from the vehicle as well as making the loading of large cargo items easier. Manufactured from stainless-steel, the GMB Defender 2nd row door hinge extension kit is supplied with two brackets and all fixings required. Fitting time is approx 5 minutes per door. -
Sale!
Unlike many of the cheaper Nas steps out there this one does come with the tuv approved certificate to allow you to tow. Made by the same manufacturer for land rover you can be assured that this is a legal rear NAS step, powder coated in black and with the original tread step and all the fixings to allow you to fit. -
Must have security Product!! Defender ALARM/BBUS plug and play relocation loom. Thieves are disabling the BBUS before stealing either parts or your entire vehicle. With this in mind now available is a 1.5m plug and play extension harness it is possible to move the BBUS (battery back up sounder) from behind the headlight to a safe inaccessible location where it is not easily disabled by thieves. Also included is a modification to prevent the factory alarm system being easily shorted out! Alarm sounder not included. -
Spring Retainer kit Defender 110" A spring retainer kit consisting of front and rear heavy duty. comes with fixings and zinc coated and then powder coated. -
Spring Retainer kit Defender 90" A spring retainer kit consisting of front and rear heavy duty. comes with fixings and zinc coated and then powder coated. -
Wildbear Land Rover Defender Headlamp Guards . Made in the UK, available in Black, Silver and Grey. Manufactured from 4mm plate to provide tough protection from branches and stones, finished with a high quality texture powder coating over zinc treatment for increased durability. These guards not only look great, they really are the part you need to prevent cracked headlight mishaps. -
Land Rover Defender front Lamp guards will not only protect your Truck but also will enhance the look of the front end. Takes minutes to fit and will make a big difference in the appearance of the front of the truck. these come as a pair and all fixings, Lamp guards are to help protect your head lamps and also to create a great look.- LAMP GUARDS
- EASY TO FIT DIY
- BLACK POWDER COATED FOR LONGER LIFE
- DEFENDER LAMP GUARDS SUPPLIED AS A PAIR
- UK MANUFACTURED
-
Land rover defender twin drl bumper-Mild steel Made out of mild steel then powder coated in Textured black to give a quality look. The LED lights are Ring and the holes they are put in have been machine pressed so the light is slightly counter sunk so not flush. This really does enhance your defender to a more modern look.- Powder coated in textured black
- Ring Automotive lights
- Comes with instructions to wire up
- Mild Steel
-
These chunky ‘Ebony and Ivory’ (‘Fire and Ice’ style) sidesteps not only look great with an attractive brushed stainless steel tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 90 also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Land rover. If an unsightly LPG tank is fitted to your vehicle the sidestep can help to disguise it.- Bolt on design, no drilling required. Fitted in minutes.
- Unique chassis clamps attach to chassis outriggers using one spanner
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive brushed stainless steel tread plate.
- Price is per pair.
- Full fitting instructions with diagrams included
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- powder coating to enhance durability & wear.
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
-
Defender 90 (1985 onwards) chunky ‘Ebony and Ivory’ side steps (‘Fire and Ice’ style) These chunky ‘Ebony and Ivory’ (‘Fire and Ice’ style) sidesteps not only look great with an attractive brushed stainless steel tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 90 also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Landrover. If an unsightly LPG tank is fitted to your vehicle the sidestep can help to disguise it.- Bolt on design, no drilling required. Fitted in minutes.
- Unique chassis clamps attach to chassis outriggers using one spanner
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive brushed stainless steel tread plate.
- Price is per pair.
- Full fitting instructions with diagrams included
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- powder coating to enhance durability & wear.
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
-
Defender 90 rear quarters chequer plate, Very high quality 3mm thick made by the OEM manufacturer and comes with all the fixings and the Foam gaskets. Color options: Silver / Black / Wildbear Grey -
Defender 90 side steps, Black powder coated with either rubber tread plate or silver chequer plate, these side steps are a great addition to your landy, easy to fit as uses existing mounts. manufactured in the UK to a high standard. -
Defender 90 (1985 onwards) chunky XS style side steps Available in Black chequer Tread plate or Silver Tread plate, select option when proceeding to checkout, For Piano style please see other listings. Also available in 90/110/130 These chunky XS sidesteps not only look great powder coated and topped with an attractive checker plate tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 90 also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Land rover.- Quick Tread brand – made in the UK.
- Bolt on design, no drilling required. Fitted in minutes.
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive checkerplate tread plate.
- Price is per pair.
- Full fitting instructions with diagrams included
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- QuickTread means quick fitting – only 5-10 minutes per side*
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
-
Defender 90 sill chequer plate made by the same supplier as land rover. these come with the gaskets and fixing kits, The 3M Chequer plate with the 5 bar pattern is to a high quality. we also do the rear quarters and the wing tops, please check other items listed. -
Defender 90 Stainless Steel Side Entry Sills designed to give you a clean look rather than the unsightly bolts and carpet edge when entering your defender, These have been designed to replace the bolts showing by dropping the stainless steel plate into the holes then all you do is tighten up the nuts to locate into place. ( Do not over tighten the nuts as you can pull through the thread ) you may need to elongate the holes slightly as we all know the tolerances on each defender differ. The plate is also angled 25 degree to press into the carpet to keep this into place. -
Protect your sills with these Defender 110 Tube Rock Sliders made from 76mm x 3.2mm Tube, Galvanised and powder-coated in textured Black. Made in the UK to a very high standard, Comes with all fixings. -
Stainless-steel replacement bonnet hinges for your Defender. The Defender Bonnet Security hinges replace the bonnet hinges on all Land Rover Defender 90/110/130 models. These are constructed from stainless-steel and supplied with stainless steel fasteners. The hinges are finished in an attractive satin black powder coated finish. Do not let thieves take your bonnet away from you when all is needed is this simple but efficient design bonnet hinge.- Comes with all fixing
- New bushes replace the standard slotted bushes within the bulkhead curl hinge.
- Coach bolts to prevent from taking off bonnet.
- Stainless-steel
-
Galvanised and powder coated in textured black, Made from 76mm x 3.2mm tube and 5mm plate, Made to a very high quality and manufactured in the UK. -
Defender fuel tank Bracket NRC9474 these are prone for rotting out so replace with this replacement part. Fuel tanks also available. fitment belowDEFENDER ALL FUEL AND AIR > FUEL TANK 1983-1998 90 ONLY NOT 4.0 EFI, 6CYL OR TD5 ONWARDS -
Fir Tree Fastener for Land Rovers used in the 2007 window trims to hold them to the sides, ( For the Window trims please check our other listings ) Pack of 10 Clips Light Grey 8mm Hole Head Diameter: 25mm Total Length: 47mm These are used on a number of different Land Rover vehicles. In particular they are used on the Land Rovers . Please check before ordering. The clips are a high quality equivalent to the OEM parts. -
Defender shock turrets Front from the wild bear range. this modern loon turret is shot blasted and then primed and powder coated in wild bear grey to give a longer lasting product. these are available in lowered / standard / + plus to suit your needs. manufactured in the UK to a very high standard. -
Defender side vent in stainless steel powder coated in Black. comes as single item. Great way of modernising your truck from the genuine plastic version. will also keep longer and give you a more attractive look. these can be used both sides. side vent are also available too in 3 different types of finishes to match top vents. -
Protect your fuel filter from being damaged while your off roading. Made from 3 mm Plate Zinc Pleated. -
Sale!
Defender 5 bar 3mm bonnet chequer plate, comes with oem Foam Gasket as per Land rover and all fixings. when it comes to chequer plate this is the highest quality on the market place. This is a 3 pcs kit. -
Defender 5 bar 3mm wing top chequer plate, comes with oem Foam Gasket as per Land rover and all fixings. when it comes to chequer plate this is the highest quality on the market place. -
Defender 5 bar 3mm bonnet chequer plate, comes with oem Foam Gasket as per Land rover and all fixings. when it comes to chequer plate this is the higest quality on the market place. -
Defender top vent, comes as a pair. Great way of modernising your truck from the genuine plastic version. will also keep longer and give you a more attractive look. -
Defender 5 bar 3mm wing top chequer plate, comes with oem Foam Gasket as per Land rover and all fixings. when it comes to chequer plate this is the highest quality on the market place. -
Out of stock
Defender 5 bar 3mm wing top chequer plate, comes with oem Foam Gasket as per Land rover and all fixings. when it comes to chequer plate this is the highest quality on the market place.