• Code: DA4100B
    Pair Satin black finish
    • Defender 110

    Add some heavy-duty protection to your Land Rover!

  • Code: DA4260
    Corresponds to ESR4238
    • Defender 90/110/130 - Td5 - 1999 - 2007
    • Discovery 2 - 4.0i - 1999 - 2004
    • Discovery 2 - Td5 - 1999 - 2004
    • Freelander 1 - V6 petrol
    • Range Rover P38 - diesel from WA376580
    • Range Rover P38 - diesel from TA346794 up to VA376579
    • Range Rover P38 - petrol from XA410482
    • Range Rover P38 - petrol from VA346794 up to VA376579
    • Range Rover P38 - petrol from WA385949 up to WA410481

    A breath of fresh air for your Land Rover

    > Tailored to fit your Land Rover > Maximum breathing efficiency for your engine means more power or better fuel mileage > No compromise on quality - the engine gets more air but the dirt particles are trapped by the quality filters > No need to replace as easy cleaning means maximum performance guaranteed > Easy fit, directly replaces standard air filter > Ideal for use in hot dusty conditions to reduce engine wear > Compatible with snorkels, ideal for use in conjunction with other performance modifications > Filters don't need pre-oiling and if the filter gets dirty there is no need to use a cleaner to clear the dirt on the filter - just use air, water or detergent

    Breathing efficiency for your engine means more power or better fuel mileage

  • Code: DA4368
    Heavy-duty Kit includes Plus 5" shock absorbers*
    • Defender 110 - from 1994 - wide bush

    Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for!

    Kit contents - > Springs - front & rear - pair > Britpart Cellular Dynamic Shock Absorbers - front & rear - pair > Radius arms - front & rear > Spring retainers - front & rear > Bush sets
  • Code: DA4379
    Corresponds to PHE500060
    • Defender - from 2007 onwards

    A breath of fresh air for your Land Rover

    > Tailored to fit your Land Rover > Maximum breathing efficiency for your engine means more power or better fuel mileage > No compromise on quality - the engine gets more air but the dirt particles are trapped by the quality filters > No need to replace as easy cleaning means maximum performance guaranteed > Easy fit, directly replaces standard air filter > Ideal for use in hot dusty conditions to reduce engine wear > Compatible with snorkels, ideal for use in conjunction with other performance modifications > Filters don't need pre-oiling and if the filter gets dirty there is no need to use a cleaner to clear the dirt on the filter - just use air, water or detergent

    Breathing efficiency for your engine means more power or better fuel mileage

  • Code: DA4599
    Solves the problem of that crude and annoying blast of hot air to your lower legs.
    • Defender - 2007 onwards
    The MUD Heater Deflector solves the problem of that crude and annoying blast of hot air to your lower legs in all Puma engine Defenders. The Heater Deflector redirects the flow of air from the lower heater outlets forwards into the footwell, rather than directly at your legs to create a more comfortable driving environment. The Heater Deflector moulding fixes easily in place using the supplied push-fit fasteners and can be fitted in 5-minutes. All you need is a 4.5mm drill. Position the Heater Deflector, drill the fixing holes in the lower dash section and fix the Heater Deflector in place using the push-fit fasteners.
  • Code: DA4629
    Grey
    • Defender - except sunroof equipped models

    Designed with CAD software.

    > Supplied with interior lamp extension loom and DIN blanking panel. > Fitting kit and instructions are also supplied. The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines. The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product. It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts. Will the Defender roof console fit my vehicle? The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification.
  • Code: DA4629B
    Black
    • Defender - except sunroof equipped models

    Designed with CAD software.

    > Supplied with interior lamp extension loom and DIN blanking panel. > Fitting kit and instructions are also supplied. The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines. The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product. It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts. Will the Defender roof console fit my vehicle? The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification.
  • Code: DA4649 Black Defender Suitable for 1 door
  • 24 splines axle shaft to diff end
    • Defender - non-ABS and ABS models from LA up to 2007

    Save time and money with a Britpart CV Joint kit!

    Britpart has put together these boxed kits to help the fitter have all the necessary parts to do the job in one hit, saving time and money trying to find the necessary parts to do the job. These kits are also helpful to pass over the trade counter instead of having to hunt for the individual parts. One kit does one CV joint.
  • No drilling required for fitment.

    The Britpart wind deflectors will reduce buffeting and wind noise when driving with the window open. Custom designed for each vehicle and easily attached - no drilling required for fitment!
    Code: DA6078
    Front 2 piece kit
    • Defender
    • Series
  • Code: DA6641
    280 pieces.
    Box of assorted popular trim clips and fixings commonly used on Land Rovers. Supplied in a handy presentation box. Contents 35 x Rivet - AFU1075 15 x Trim fastener - ANR2224 15 x Scrivet - DYQ100230 15 x Scrivet - AWR3994 15 x Scrivet - DYQ100320 25 x Finisher clip - DYC101420 20 x Stud door casing - MWC9134 20 x Stud door casing - blue - MWC9134BLUE 20 x Fastener - MXC1800 60 x Snapsac - MWC3136 25 x Door casing stud - DKP5279L 15 x Fir tree roof insulation retainer - DA1634
  • Enhance your Defender's look with a pair of these smart and robust side protectors.
  • Code: DA8092
    Bonnet
    • Defender - 2007 onwards

    Use it on your doors, floor, roof, bonnet and loadspace.

    Dynamat Xtreme is the highest efficiency sound deadening material available and the most effective product for stopping noise and vibration. Dynamat Xtreme can be used on any and all interior sheet metal and fibreglass body panels. The aluminium constraining layer is very moldable and conforms easily to all interior surfaces. The patented extra sticky butyl layer is formulated with VECTOR chemistry for the most amazing energy conversion capabilities ever. Use it on your doors, floor, roof, bonnet and loadspace for a quiet, cool and incredibly solid ride. > Create a solid, luxury car feel with a reduction in road noise. > Stop resonance & vibrations, reduces buzzes & rattles. > Improved sound. Get more bass. Hear more of your music. > For use throughout your vehicle interior, the first step to an improved Land Rover. Britpart is the official Dynamat wholesaler in the Land Rover aftermarket.
  • LED side repeaters Code: DA8531 Smoked LED side repeaters Sold as a pair For LR Defender - Td5 onwards
  • DEFENDER 95mm LIGHT PLINTH
  • Fed up with winding your windows up and down?

    Make life easier, add electric front windows to your Defender with this comprehensive kit. Includes fitting instructions.
  • SWITCH WASH/WIPE Code: AMR6106
  • DEFENDER TUNING BOX Code: DA4507 Power increases by 27bhp (20kw) Torque increases by 71Nm Defender - Puma 2.2Tdci The 2011 onwards 2.2 Tdci model Defender has new style piezo injectors and requires specialised tuning solutions. It is currently not possible to remap the ECU through the OBD port. This substantial new tuning unit is designed to plug directly into the wiring loom and requires no modification to the vehicle. Contained in waterproof housing so can be safely located in the engine bay.
  • DOOR HINGE KIT Code: DA1275 2nd row doors Torx head bolts Zinc plated finish Set of 4 Defender Series 3 Defender 2007 onwards but can be used on earlier vehicles. Enhance your Land Rover's appearance! > Replacement zinc plated door hinges with torx head bolts and all other fixings > Complete with torx head bolt fixings
  • DOOR HINGE KIT Code: DA1131 Front row doors Natural aluminium finish Set of 4 Defender Series 3 Enhance your Land Rover's appearance! > Replacement aluminium door hinges with stainless steel hinge pins > Complete with stainless steel fixings
  • DOOR HINGE KIT Code: DA1309 2nd row doors Natural aluminium finish Set of 4 Defender Series 3 Enhance your Land Rover's appearance! > Replacement aluminium door hinges with stainless steel hinge pins > Complete with stainless steel fixings.
  • DOOR HINGE KIT Code: DA1305 Front row doors Anodised black finish Set of 4 Defender Series 3 Enhance your Land Rover's appearance! > Replacement anodised door hinges with stainless steel hinge pins > Complete with stainless steel fixings
  • EGR BLANKING & SILICONE HOSE KIT Code: DA1108TDI Kit contains - blue silicone hoses, EGR kit & Jubilee clips Defender - 300Tdi engine Discovery 1 - 300Tdi engine Range Rover Classic - 300Tdi engine Better fuel economy... Improved performance... A Britpart EGR (exhaust gas recirculation) blanking kit enables you to remove the original mechanical EGR from the vehicle resulting in better fuel economy and improved performance. Britpart silicone hoses are quality intercooler hoses designed to operate at a higher temperature then the original hoses. Fits with both standard and performance intercoolers. Will not rot or perish like standard rubber hoses.
  • DOOR HINGE KIT Code: DA1070 Front row doors Torx head bolts Zinc plated finish Set of 4 Defender Series 3 Defender 2007 onwards but can be used on earlier vehicles. Enhance your Land Rover's appearance! > Replacement zinc plated door hinges with torx head bolts and all other fixings > Complete with torx head bolt fixings
  • RED SEAT BELT Code: DA5079 Front RHS Defender - station wagon - Td5 onwards Add a splash of colour to your Defender’s interior by fitting a set of these red seat belts. Type approved.
  • BOMBPROOF HINGE GUARDS Code: DA1399 4-door kit Defender - all models The hinge guard is built to exact specification and was developed to fit all Defender models and years. It has been engineered for maximum protection and ease of fitment. Each Hinge Guard kit consists of two CAD engineered stainless steel plates which fit inside of each hinge point, restricting outward movement of the door with the bulkhead bolts removed. Fitting the Hinge Guards is incredibly easy with comprehensive fitting instructions supplied. Each door kit can be easily fitted in 20-30 minutes. After installation, only the top of each plate can be seen, providing an unobtrusive modification and deterrent to would-be thieves. Features > Notched upper guard - fits neatly around the dash padding without compromising security. > Custom folds - each plate has a carefully measured, very small offset to allow it to close around the door frame without tearing the door seal. > High-Grade 304 Stainless Steel - 2mm thick: thin enough to fit unobtrusively, more than thick enough to protect your hinges. > Individually profiled - lower and rear hinges profiled for a perfect fit across all variants.
  • LONG RANGE FUEL TANK Code: DA4546 Defender 110 - 1999 onwards (Td5 & Puma models) The best way of getting more fuel in to the vehicle without using valuable space or complex pumping systems. > Rear arch metal spare fuel tank > 45 litres > Right hand side > Supplied with all the necessary fittings as well as a replacement filler neck and specifically engineered bulkhead fitting for the balance pipe, having these makes the fitting of the tank quicker and easier as well as it working better too. Notes Not suitable for Defender 130. Additional bracket required for 7 seater.
  • LONG TRAVEL REAR SHOCKER ABSORBER MOUNTING KIT Code: DA6337 Defender Discovery 1 Range Rover Classic Laser cut, jigged and computer welded with zinc plated and powder coated finish The standard pin and eye shock absorbers don't have the necessary articulation for extreme off-road conditions and the answer is to use pin and pin shock absorbers. If you use our Cellular Dynamic Plus 5" shock absorbers (DC6000LL) they offer better articulation. Note - On Defender Td5 the fuel filter must be moved.
  • OIL FILLER CAP Code: DA8891 Anodised aluminium Defender - Tdci