-
-
-
SPRING SEAT Code: NRC9700GALV Galvanised Defender Discovery 1 Range Rover Classic -
HEAVY-DUTY SPRING RETAINERS Code DA2363 -
LONG TRAVEL REAR SHOCKER ABSORBER MOUNTING KIT Code: DA6337 Defender Discovery 1 Range Rover Classic Laser cut, jigged and computer welded with zinc plated and powder coated finish The standard pin and eye shock absorbers don't have the necessary articulation for extreme off-road conditions and the answer is to use pin and pin shock absorbers. If you use our Cellular Dynamic Plus 5" shock absorbers (DC6000LL) they offer better articulation. Note - On Defender Td5 the fuel filter must be moved. -
-
-
TWIN SHOCK BRACKETS - KIT Code: DA6324 Rear Defender Discovery 1 Range Rover Classic Sometimes off-road conditions can be serious enough to test the standard equipment on your Land Rover to its maximum One of the critical components that takes most of the abuse is the suspension system. When using the standard single shock absorber configuration it is not unknown for the shock absorber to break the factory fitted turret mount. These shock absorber brackets from Britpart give you confidence that your vehicles suspension will tackle the terrain you take it through with greater ease. The single shock absorber bracket is manufactured from heavy-duty steel and replaces the existing turret mount which is susceptible to corrosion by allowing a build up of dirt inside which is hard to clean thoroughly. The new design is harder wearing and easier to clean. The twin shock absorber bracket is manufactured from the same quality steel as the single shock absorber bracket but allows for the fitment of an additional shock absorber. The benefits of having extra shock absorbers fitted to your Land Rover is that any extreme force encountered is divided between the two shock absorbers for a more comfortable ride for you and your passengers. Using twin shocks is also beneficial when carrying loads both on and off-road as it improves the load carrying ability of the vehicle. An additional benefit is that when changing shock absorbers there is no need to remove the brackets. Notes > Rear brackets involve some welding to fit. > Fitting shock absorber brackets may require some vehicle modification, please ask distributor for full details. -
OLD MAN EMU - STEERING DAMPER Code: DA8925 Defender Steering dampers with nitrogen charged foam cell for reduced wheel vibration and improved handling and control. Features > Massive 35mm bore. > 9 stage valving for optimum performance. > Stone guard. > Fits original mounts. > 50/50 valving. -
BRITPART PERFORMANCE LIFTED SPRINGS Code: DA4202 Front pair Lift - 40mm Load - 50kg Defender 90 Defender 110 Defender 130 Discovery 1 Range Rover Classic Bar diameter - 16mm Rate - 230lbs/in Free height - 390mm The right choice when replacing the old sagging original springs! Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases. -
SINGLE SHOCK TURRETS Code: DA6323L 2” Lift Front Defender Discovery 1 Range Rover Classic Sometimes off-road conditions can be serious enough to test the standard equipment on your Land Rover to its maximum One of the critical components that takes most of the abuse is the suspension system. When using the standard single shock absorber configuration it is not unknown for the shock absorber to break the factory fitted turret mount. These shock absorber turrets from Britpart give you confidence that your vehicles suspension will tackle the terrain you take it through with greater ease. The single shock absorber turret is manufactured from heavy-duty steel and replaces the existing turret mount which is susceptible to corrosion by allowing a build up of dirt inside which is hard to clean thoroughly. The new design is harder wearing and easier to clean. The twin shock absorber turret is manufactured from the same quality steel as the single shock absorber turret but allows for the fitment of an additional shock absorber. The benefits of having extra shock absorbers fitted to your Land Rover is that any extreme force encountered is divided between the two shock absorbers for a more comfortable ride for you and your passengers. Using twin shocks is also beneficial when carrying loads both on and off-road as it improves the load carrying ability of the vehicle. An additional benefit is that when changing shock absorbers there is no need to remove the turrets. Note - Fitting shock absorber turrets may require some vehicle modification, please ask distributor for full details. -
BRITPART PERFORMANCE LIFTED SPRINGS Code: DA4206 Rear pair Lift - 40mm Load - 100kg Defender 110 Bar diameter - 17mm Rate - 270-295lbs/in Free height - 445mm The right choice when replacing the old sagging original springs! Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases.
-
BRITPART PERFORMANCE LIFTED SPRINGS Code: DA4205 Rear pair Lift - 50mm Load - 200kg Defender 90 Discovery 1 Discovery 2 Range Rover Classic Bar diameter - 19mm Rate - 360lbs/in Free height - 430mm The right choice when replacing the old sagging original springs! Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases.
-
OLD MAN EMU COIL SPRINGS Code: DA8912 Rear Lift - Up to 40mm Defender - 90 Discovery 1 Discovery 2 Range Rover Classic Spring rate - 300/340lbf/in / 52/60N/mm Free height - 420mm Defender - 90. Load - 200kgs Discovery 1. Load - 100kgs Discovery 2. Load - 100kgs Range Rover Classic. Load - 100kgs > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils. -
BRITPART PERFORMANCE LIFTED SPRINGS Code: DA4208 Rear pair Lift - 50mm Load - 500kg Defender 110 Defender 130 Bar diameter - 21mm Rate - 420lbs/in Free height - 445mm The right choice when replacing the old sagging original springs! Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases. -
OLD MAN EMU COIL SPRINGS Code: DA8924 Front Lift - Up to 40mm Defender - 90 - diesel Discovery 1 Range Rover Classic Spring rate - 285lbf/in / 50N/mm Free height - 385mm Load - 51 - 110kgs > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
Call Us Today! +6012-220 5085|sales@defenderupgrades.com.my
