-
Code: DA7305 Black/Red fabric SINGLE Defender - excluding truck cabs* Redesigned bolsters for greater support and new padding configurations for improved comfort > Lightweight and compact > High comfort > Tubular frame construction > High quality recline mechanism for smooth and easy adjustment > Compatible with 3 or 4 fixing point harnesses > Base mounted - 271 x 345mm Drawing on decades of racing history, Sparco has created a line of street car seats that offer the ultimate in comfort and performance. The ergonomic designs help cradle and protect the driver against even the most demanding lateral forces. The R100 is Sparco’s latest incarnation of groundbreaking steel-model seats. It features redesigned bolsters for greater support and new padding configurations for improved comfort. It has been built with comfort and support in mind but it's lower side bolsters and slightly narrower steel frame allow it to fit into vehicles where fitting seats with larger side bolsters may be difficult. The seat features backrest harness slots so that it can be used with a race type harness or normal seatbelts. The seats can be reclined using the double adjuster lever. Made from a durable fabric, the R100 is available in single tone or duo-tone styles. Duo-tone styles feature contrasting side accenting and stitching to match any interior. The Sparco R100 Seat range is designed to attach using Sparco vehicle specific seat mounts. *Not suitable for vehicles with truck cabs fitted as they restrict the leg room in the vehicle. -
Code: DA7306- Defender - excluding truck cabs
-
Code: DA1683Right hand drive- Defender - 2007 onwards
The Red Booster servo clutch kit makes your Defenders clutch much easier to press.
-
Code: RBL2303SSSBLACKFull external style bar Black- Defender 90 - Hard Top with bulkhead, 2-door
- Defender 90 - Hard Top without bulkhead, 2-door
- Defender 90 - Station Wagon without bulkhead, 2-door
- Defender 90 - Station Wagon with bulkhead, 2-door
- Defender 110 - Hard Top, 2-door
- Defender 110 - Station Wagon, 4-door
- Defender 110 - Crew Cab/Double Cab Pick-up, 4-door
- Defender 130 - Station Wagon, 4-door
- Defender 130 - High Capacity Crew Cab Double Cab Pick-up, 4-door
Unrivalled quality...
Safety Devices are the UK's original designers and manufacturers of roll cages and roof racks for Land Rover. Originally designed for the British Army and the Camel Trophy, today an extensive range of designs are available. The quality is exceptional - cold drawn seamless steel, grit blasted, zinc primed and black powder coated roll cages and roof racks will stand up to the sort of challenges you expect your Land Rover to cope with. Safety Devices offer design excellence, unrivalled quality and a huge choice. Other Safety Devices roll cages are available - ask for details. More information and images can be found at Safety Devices Website -
A classic mushroom-top snorkel. If you're likely to be driving your Land Rover in circumstances which could mean wading deep water or driving in very dusty conditions then you should consider fitting a raised air intake to your vehicle. This version from Britpart is a classic mushroom-top snorkel for Defender. Featuring heavy-duty metal pipe work, cyclone pre-cleaner and a durable attractive Matt black finish. -
Code: DA7307Removable- Defender - excluding truck cabs
-
Code: DA5051- Defender - 2007 onwards
A great replacement for your standard Defender gear lever. These polished aluminium gear levers are easy to fit with no modifications required. Just remove the plastic from the existing levers and swap with these high quality replacements. -
LED side repeaters Code: DA8531 Smoked LED side repeaters Sold as a pair For LR Defender - Td5 onwards -
Code: DA8092Bonnet- Defender - 2007 onwards
Use it on your doors, floor, roof, bonnet and loadspace.
Dynamat Xtreme is the highest efficiency sound deadening material available and the most effective product for stopping noise and vibration. Dynamat Xtreme can be used on any and all interior sheet metal and fibreglass body panels. The aluminium constraining layer is very moldable and conforms easily to all interior surfaces. The patented extra sticky butyl layer is formulated with VECTOR chemistry for the most amazing energy conversion capabilities ever. Use it on your doors, floor, roof, bonnet and loadspace for a quiet, cool and incredibly solid ride. > Create a solid, luxury car feel with a reduction in road noise. > Stop resonance & vibrations, reduces buzzes & rattles. > Improved sound. Get more bass. Hear more of your music. > For use throughout your vehicle interior, the first step to an improved Land Rover. Britpart is the official Dynamat wholesaler in the Land Rover aftermarket. -
Code: DA6641280 pieces.Box of assorted popular trim clips and fixings commonly used on Land Rovers. Supplied in a handy presentation box. Contents 35 x Rivet - AFU1075 15 x Trim fastener - ANR2224 15 x Scrivet - DYQ100230 15 x Scrivet - AWR3994 15 x Scrivet - DYQ100320 25 x Finisher clip - DYC101420 20 x Stud door casing - MWC9134 20 x Stud door casing - blue - MWC9134BLUE 20 x Fastener - MXC1800 60 x Snapsac - MWC3136 25 x Door casing stud - DKP5279L 15 x Fir tree roof insulation retainer - DA1634 -
No drilling required for fitment.
The Britpart wind deflectors will reduce buffeting and wind noise when driving with the window open. Custom designed for each vehicle and easily attached - no drilling required for fitment!Code: DA6078Front 2 piece kit- Defender
- Series
-
Code: DA5726Black/ air leatherBlack polyurethane is combined with airleather inserts for the grip of the Quark. The upper section is thinner and gets thicker on the handle to improve comfort. Diameter 350mm Dish 40mm Spoke Color Black Grip Shape Circular Grip Section 28mm x 35mm Coating Material Polyurethane Coating Color Black Insert Black -
Code: DA4649 Black Defender Suitable for 1 door -
Code: DA4629BBlack- Defender - except sunroof equipped models
Designed with CAD software.
> Supplied with interior lamp extension loom and DIN blanking panel. > Fitting kit and instructions are also supplied. The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines. The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product. It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts. Will the Defender roof console fit my vehicle? The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification. -
Code: DA4629Grey- Defender - except sunroof equipped models
Designed with CAD software.
> Supplied with interior lamp extension loom and DIN blanking panel. > Fitting kit and instructions are also supplied. The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines. The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product. It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts. Will the Defender roof console fit my vehicle? The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification. -
Code: DA4599Solves the problem of that crude and annoying blast of hot air to your lower legs.- Defender - 2007 onwards
The MUD Heater Deflector solves the problem of that crude and annoying blast of hot air to your lower legs in all Puma engine Defenders. The Heater Deflector redirects the flow of air from the lower heater outlets forwards into the footwell, rather than directly at your legs to create a more comfortable driving environment. The Heater Deflector moulding fixes easily in place using the supplied push-fit fasteners and can be fitted in 5-minutes. All you need is a 4.5mm drill. Position the Heater Deflector, drill the fixing holes in the lower dash section and fix the Heater Deflector in place using the push-fit fasteners.
Call Us Today! +6012-220 5085|sales@defenderupgrades.com.my
