Code: DA2603CF
Carbon fibre effect finish facia plate
Suitable for right & left hand drive models
- Defender - 2007 onwards
-
-
Code: DA1203- Defender - 2002 onwards
Does your Defender's rear door sometimes close on you unexpectedly?
This neat and easily installed gas strut kit will solve that problem and replaces the original door stopper. The gas strut will hold the door in place when open - even with a spare wheel in place - and will assist in the opening of the rear door too with a smoother and more controlled movement. Complete with fittings and instructions. -
Code: DA4049SPainted silver finish Pair- Defender
Add some heavy-duty protection to your Land Rover!
-
Croytec Puma vent bezels This product is designed and developed by Croytec specifically for Puma/ Tdci models of 90/110/130 from 2007 onwards. The vent bezels are easy to fit, they are a direct replacement of the original. Our standard finish is silver but all of our range of aluminium products are available in different anodised colours. for more details or want a different colour please email us to get availability and price. -
Code: DA2480 Rear - RHS Manual window Black Defender Replace your Defender's old tatty door cards with one of these smart plastic replacements. Easy to fit they are also easy to keep clean with a wipe clean finish. Includes fasteners. -
Code: DA2481 Rear - LHS Manual window Black Defender Replace your Defender's old tatty door cards with one of these smart plastic replacements. Easy to fit they are also easy to keep clean with a wipe clean finish. Includes fasteners. -
Code: DA2440 Front - RHS Manual window Black Defender - 1987 up to 5A689036 Replace your Defender's old tatty door cards with one of these smart plastic replacements. Easy to fit they are also easy to keep clean with a wipe clean finish. Includes fasteners. -
Code: DA2441 Front - LHS Manual window Black Defender - 1987 up to 5A689036 Replace your Defender's old tatty door cards with one of these smart plastic replacements. Easy to fit they are also easy to keep clean with a wipe clean finish. Includes fasteners. -
Satin black finish Pair- Defender
Add some heavy-duty protection to your Land Rover!
-
New black mesh trim Defender 'Chubby' box Extra padded lid! Fitting a Britpart ‘Chubby’ box in your Land Rover will not only help you keep your vehicle clutter free but it will also make driving more of a pleasure with the extra padded lid. Our standard cubby boxes have a 20mm thick lid while the ‘Chubby’ boxes have a lovely thick and comfy 80mm thick lid. With a double cup holder as standard, split drinks are a thing of the past. Hand-built in the UK, these quality cubby boxes are suitable for Series 3 and Defenders. Well crafted with precision tools using a hard wearing leatherette outer with locking stay brass hinges. Top - Black mesh Body - Black For Defender For Series 3 -
A classic mushroom-top snorkel. If you're likely to be driving your Land Rover in circumstances which could mean wading deep water or driving in very dusty conditions then you should consider fitting a raised air intake to your vehicle. This version from Britpart is a classic mushroom-top snorkel for Defender. Featuring heavy-duty metal pipe work, cyclone pre-cleaner and a durable attractive Matt black finish. -
Code: DA4629BBlack- Defender - except sunroof equipped models
Designed with CAD software.
> Supplied with interior lamp extension loom and DIN blanking panel. > Fitting kit and instructions are also supplied. The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines. The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product. It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts. Will the Defender roof console fit my vehicle? The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification. -
Code: DA4629Grey- Defender - except sunroof equipped models
Designed with CAD software.
> Supplied with interior lamp extension loom and DIN blanking panel. > Fitting kit and instructions are also supplied. The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines. The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product. It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts. Will the Defender roof console fit my vehicle? The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification. -
Enhance your Defender's appearance!
Made from GRP (glass-reinforced plastic AKA fibreglass) this Defender Puma bonnet is half the weight of the original Land Rover bonnets. The bonnet has return edges on all four sides underneath for strength and to make it more rigid. It has strengthened hinge points and is supplied with stainless steel hinge-bolts & screws.Code: DA1963White- Defender 90 - 1984 onwards
- Defender 110 - 1983 onwards
-
Code: DA7305 Black/Red fabric SINGLE Defender - excluding truck cabs* Redesigned bolsters for greater support and new padding configurations for improved comfort > Lightweight and compact > High comfort > Tubular frame construction > High quality recline mechanism for smooth and easy adjustment > Compatible with 3 or 4 fixing point harnesses > Base mounted - 271 x 345mm Drawing on decades of racing history, Sparco has created a line of street car seats that offer the ultimate in comfort and performance. The ergonomic designs help cradle and protect the driver against even the most demanding lateral forces. The R100 is Sparco’s latest incarnation of groundbreaking steel-model seats. It features redesigned bolsters for greater support and new padding configurations for improved comfort. It has been built with comfort and support in mind but it's lower side bolsters and slightly narrower steel frame allow it to fit into vehicles where fitting seats with larger side bolsters may be difficult. The seat features backrest harness slots so that it can be used with a race type harness or normal seatbelts. The seats can be reclined using the double adjuster lever. Made from a durable fabric, the R100 is available in single tone or duo-tone styles. Duo-tone styles feature contrasting side accenting and stitching to match any interior. The Sparco R100 Seat range is designed to attach using Sparco vehicle specific seat mounts. *Not suitable for vehicles with truck cabs fitted as they restrict the leg room in the vehicle. -
Code: DA5726Black/ air leatherBlack polyurethane is combined with airleather inserts for the grip of the Quark. The upper section is thinner and gets thicker on the handle to improve comfort. Diameter 350mm Dish 40mm Spoke Color Black Grip Shape Circular Grip Section 28mm x 35mm Coating Material Polyurethane Coating Color Black Insert Black