• Code: DA4071B
    Pair Satin black finish
    • Defender 110

    Add some heavy-duty protection to your Land Rover!

  • Code: DA4100
    Pair Natural aluminium finish
    • Defender 110

    Add some heavy-duty protection to your Land Rover!

  • Code: DA4100B
    Pair Satin black finish
    • Defender 110

    Add some heavy-duty protection to your Land Rover!

  • Code: DA4260
    Corresponds to ESR4238
    • Defender 90/110/130 - Td5 - 1999 - 2007
    • Discovery 2 - 4.0i - 1999 - 2004
    • Discovery 2 - Td5 - 1999 - 2004
    • Freelander 1 - V6 petrol
    • Range Rover P38 - diesel from WA376580
    • Range Rover P38 - diesel from TA346794 up to VA376579
    • Range Rover P38 - petrol from XA410482
    • Range Rover P38 - petrol from VA346794 up to VA376579
    • Range Rover P38 - petrol from WA385949 up to WA410481

    A breath of fresh air for your Land Rover

    > Tailored to fit your Land Rover > Maximum breathing efficiency for your engine means more power or better fuel mileage > No compromise on quality - the engine gets more air but the dirt particles are trapped by the quality filters > No need to replace as easy cleaning means maximum performance guaranteed > Easy fit, directly replaces standard air filter > Ideal for use in hot dusty conditions to reduce engine wear > Compatible with snorkels, ideal for use in conjunction with other performance modifications > Filters don't need pre-oiling and if the filter gets dirty there is no need to use a cleaner to clear the dirt on the filter - just use air, water or detergent

    Breathing efficiency for your engine means more power or better fuel mileage

  • Code: DA4368
    Heavy-duty Kit includes Plus 5" shock absorbers*
    • Defender 110 - from 1994 - wide bush

    Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for!

    Kit contents - > Springs - front & rear - pair > Britpart Cellular Dynamic Shock Absorbers - front & rear - pair > Radius arms - front & rear > Spring retainers - front & rear > Bush sets
  • Code: DA4379
    Corresponds to PHE500060
    • Defender - from 2007 onwards

    A breath of fresh air for your Land Rover

    > Tailored to fit your Land Rover > Maximum breathing efficiency for your engine means more power or better fuel mileage > No compromise on quality - the engine gets more air but the dirt particles are trapped by the quality filters > No need to replace as easy cleaning means maximum performance guaranteed > Easy fit, directly replaces standard air filter > Ideal for use in hot dusty conditions to reduce engine wear > Compatible with snorkels, ideal for use in conjunction with other performance modifications > Filters don't need pre-oiling and if the filter gets dirty there is no need to use a cleaner to clear the dirt on the filter - just use air, water or detergent

    Breathing efficiency for your engine means more power or better fuel mileage

  • Code: DA4587
    1,210mm long x 325mm wide x 60mm deep Max load - 3.5 tons Plastic Sold as a pair
  • Code: DA4599
    Solves the problem of that crude and annoying blast of hot air to your lower legs.
    • Defender - 2007 onwards
    The MUD Heater Deflector solves the problem of that crude and annoying blast of hot air to your lower legs in all Puma engine Defenders. The Heater Deflector redirects the flow of air from the lower heater outlets forwards into the footwell, rather than directly at your legs to create a more comfortable driving environment. The Heater Deflector moulding fixes easily in place using the supplied push-fit fasteners and can be fitted in 5-minutes. All you need is a 4.5mm drill. Position the Heater Deflector, drill the fixing holes in the lower dash section and fix the Heater Deflector in place using the push-fit fasteners.
  • Code: DA4629
    Grey
    • Defender - except sunroof equipped models

    Designed with CAD software.

    > Supplied with interior lamp extension loom and DIN blanking panel. > Fitting kit and instructions are also supplied. The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines. The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product. It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts. Will the Defender roof console fit my vehicle? The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification.
  • Code: DA4629B
    Black
    • Defender - except sunroof equipped models

    Designed with CAD software.

    > Supplied with interior lamp extension loom and DIN blanking panel. > Fitting kit and instructions are also supplied. The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines. The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product. It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts. Will the Defender roof console fit my vehicle? The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification.
  • Code: DA4649 Black Defender Suitable for 1 door
  • Code: DA4715
    Long luggage rail Roll cage mount 2.8m x 1.4m  /  40kgs
    • Defender 110 - hard top & station wagon
    4 roof cross rails as standard and can accommodate 3 additional roof cross rails. Long luggage rail with rain gutter mount, ideal for front or back loaded tents. Refer to owners handbook for recommended maximum weight.

    Heavy-duty steel roof rack.

    > The standard pack includes a steel roof rack, fixing bolts and optional roof cross rails. > Roof racks are grit blasted, primed with a zinc enriched powder undercoat, and finished with a durable black powder coat. > Not compatible with a sunroof. > Tents can normally be affixed to the roof rack without a floor, although a marine ply non-slip floor is also available. > Additional roof cross rails are available to purchase for use without a roof rack for use as, for example, a roof bar, basic tent support, attaching a roof storage box or to spread additional load on the Safety Devices' roof racks.