• SEAL - INNER Code: MTC4994
  • 400 amp snap connectors.
  • When suspention lift kits are fitted it increases the distance between the transfer box flange and the axle.The increased distance can cause the propshaft to run out of spline travel, Fitting this 40mm propshaft spacer helps return the shaft to its normal operating length therefore allowing full spline travel and prevents binding of the yokes.

    Manufactured in the UK 

    Fits Land Rover Discovery 1 & 2,

    Defender (all models), Range Rover Classic and P38

    Kit includes:

    1 x Matt BLACK Anodised Spacer

    1 x kit of nut and bolts

  • SWITCH WASH/WIPE Code: AMR6106
  • SWITCH - INDICATOR Code: PRC2956
  • PIAA (ORI) OTO Style Horn 400Hz / 500Hz HO-14 PIAA OTO Style Horn is the newest horn on the market. Its a great horn with a very affordable price ( link to the PIAA OTO style horn). - 112 dB Loud and definitely will attract attention - Dual Tone 400Hz and 500Hz - Water and Dust proof design - Slim design, can easily be installed just about anywhere - Meets PIAA standard >100,000 sound durability test
  • Code: DA1072
    Metal - chrome finish Single
    • Range Rover L322
    • Range Rover Sport - Mk1

    Enhance your Range Rover's appearance!

  • Code: DA2390

    Don’t get caught out with a flat tyre or two!

    Pack and leave an easy to use Britpart tyre repair kit* in your vehicle. How It Works 1. Find and remove the item that caused the puncture. 2. Apply rubber solution to the reamer tool then push the reamer into the puncture and work up and down until the reamer moves easily in the hole. 3. Thread one rubber tyre plug in the hook tool. 4. Push the rubber tyre plug into the hole until ½" of the tyre plug remains outside the tyre then turn the hook tool a quarter turn and pull out slowly. 5. Cut off the excess tyre plug as close to the tyre as possible. 6. If the puncture is too big have the tyre fixed by a professional. *Recommended for off-road use only
  • PIAA Si-Tech Flat Silicone Wiper CODE- DUMM0003 Available Options are sold per unit basis Select Your Wiper Length 14 Inch / 350mm, 15 Inch / 380mm (+RM15.00) 16 Inch / 400mm (+RM15.00) 17 Inch / 430mm (+RM15.00) 18 Inch / 450mm (+RM15.00)19 Inch / 475mm(+RM15.00) 20 Inch / 500mm(+RM25.00)21 Inch / 525mm(+RM25.00) 22 Inch / 550mm(+RM25.00)24 Inch / 600mm(+RM35.00) 26 Inch / 650mm(+RM35.00)28 Inch / 700mm(+RM45.00)
  • Land Rover Defender Pair of Front Mud Flap Brackets - MTC3000 & MTC3001 Extented 30mm , pair of front mud flap brackets, suitable for all Land Rover Defenders. This is for the bracket only, and doesn't include the rubber flap.
    This corresponds to the following part numbers:
    MTC3000, MTC3001 extended 30mm 
    This will fit the following vehicles:
    Land Rover Ninety/One Ten
    Land Rover Defender
  • Land Rover Defender Pair of Front Mud Flap Brackets - MTC3000 & MTC3001, pair of front mud flap brackets, suitable for all Land Rover Defenders. This is for the bracket only, and doesn't include the rubber flap.
    This corresponds to the following part numbers:
    MTC3000, MTC3001
    This will fit the following vehicles:
    Land Rover Ninety/One Ten
    Land Rover Defender
  • SWITCH - REVERSING LAMP Code: LR077773LR
  • Modernise your defender with these 95m led light. these are not cheap aftermarket range these are made by TruckLite with a guaranteed 2 year warranty. please note these do not have the connectors. Other Colours are available and plinths on other listings, if require any help please email or call us. Truck-Lite brings you the all New 837 LED Signal Lighting Range. All lamps are 12v and 24v allowing them to be used on a number of vehicles. The 837 lamps have a slim profile helping to enhance life of the product and reducing risk of breakage. With LED SMD technology these lights are insured to have a longer life but if anything should happen they are covered under a 2 year warranty offered by TruckLite. With the option of surface or recess mount and a single core wire this product is easy to wire and assemble. Also to ease fixing there is no need for special tools required when fixing this product. The 837 range is polarity protected allowing you to easily fit you lamps without the worry of blowing the LED’s. The whole 837 range are ECE and EMC approved.
  • Modernise your defender with these 95m led light. these are not cheap aftermarket range these are made by TruckLite with a guaranteed 2 year warranty. please note these do not have the connectors. Other Colours are available and plinths on other listings, if require any help please email or call us. Truck-Lite brings you the all New 837 LED Signal Lighting Range. All lamps are 12v and 24v allowing them to be used on a number of vehicles. The 837 lamps have a slim profile helping to enhance life of the product and reducing risk of breakage. With LED SMD technology these lights are insured to have a longer life but if anything should happen they are covered under a 2 year warranty offered by TruckLite. With the option of surface or recess mount and a single core wire this product is easy to wire and assemble. Also to ease fixing there is no need for special tools required when fixing this product. The 837 range is polarity protected allowing you to easily fit you lamps without the worry of blowing the LED’s. The whole 837 range are ECE and EMC approved.
  • Modernise your defender with these 95m led light. these are not cheap aftermarket range these are made by TruckLite with a guaranteed 2 year warranty. please note these do not have the connectors. Other Colours are available and plinths on other listings, if require any help please email or call us. Truck-Lite brings you the all New 837 LED Signal Lighting Range. All lamps are 12v and 24v allowing them to be used on a number of vehicles. The 837 lamps have a slim profile helping to enhance life of the product and reducing risk of breakage. With LED SMD technology these lights are insured to have a longer life but if anything should happen they are covered under a 2 year warranty offered by TruckLite. With the option of surface or recess mount and a single core wire this product is easy to wire and assemble. Also to ease fixing there is no need for special tools required when fixing this product. The 837 range is polarity protected allowing you to easily fit you lamps without the worry of blowing the LED’s. The whole 837 range are ECE and EMC approved.
  • Modernise your defender with these 95m led light. these are not cheap aftermarket range these are made by TruckLite with a guaranteed 2 year warranty. please note these do not have the connectors. Other Colours are available and plinths on other listings, if require any help please email or call us. Truck-Lite brings you the all New 837 LED Signal Lighting Range. All lamps are 12v and 24v allowing them to be used on a number of vehicles. The 837 lamps have a slim profile helping to enhance life of the product and reducing risk of breakage. With LED SMD technology these lights are insured to have a longer life but if anything should happen they are covered under a 2 year warranty offered by TruckLite. With the option of surface or recess mount and a single core wire this product is easy to wire and assemble. Also to ease fixing there is no need for special tools required when fixing this product. The 837 range is polarity protected allowing you to easily fit you lamps without the worry of blowing the LED’s. The whole 837 range are ECE and EMC approved.
  • Modernise your defender with these 95m led light. these are not cheap aftermarket range these are made by TruckLite with a guaranteed 2 year warranty. please note these do not have the connectors. Other Colours are available and plinths on other listings, if require any help please email or call us. Truck-Lite brings you the all New 837 LED Signal Lighting Range. All lamps are 12v and 24v allowing them to be used on a number of vehicles. The 837 lamps have a slim profile helping to enhance life of the product and reducing risk of breakage. With LED SMD technology these lights are insured to have a longer life but if anything should happen they are covered under a 2 year warranty offered by TruckLite. With the option of surface or recess mount and a single core wire this product is easy to wire and assemble. Also to ease fixing there is no need for special tools required when fixing this product. The 837 range is polarity protected allowing you to easily fit you lamps without the worry of blowing the LED’s. The whole 837 range are ECE and EMC approved.
  • Comes with 3 meter of wire one waterproof connector / fuse box / relay and switch Great if you want to wire up Aux lights for the rear of the truck or a single spot to the front. Easy to fit and no messing around trying to make up your own loom.
  • Defender LED Smoke Reverse Light 95mm, Create a new look with these smoke version LED`s That comes with fixing screws and plug to allow you to plug and Play.
  • Defender LED Smoke Fog Light 95mm, Create a new look with these smoke version LED`s That comes with fixing screws and plug to allow you to plug and Play.
  • Defender LED Clear Reverse Light 95mm, Create a new look with these Clear version LED`s That comes with fixing screws and plug to allow you to plug and Play.
  • Defender LED Clear Fog Light 95mm, Create a new look with these Clear version LED`s That comes with fixing screws and plug to allow you to plug and Play.
  • Timing Belt & Tensioner (2.5L I4 300 TDi Diesel Turbo LR) CODE :LHP100860
  • Land Rover Defender Rear Tailgate Badge Gloss Black.. these 3d badges really set off the back of the truck
  • Defender side vent in stainless steel powder coated in Black. comes as single  item. Great way of modernising your truck from the genuine plastic version. will also keep longer and give you a more attractive look. these can be used both sides. side vent are also available too in 3 different types of finishes to match top vents.
  • Defender TD5 / TDCI Aux Light Switch for front Fogs or for other lighting you have. Many people like to add lights o their vehicle and use and original looking switch to keep the dash looking the same. On the Defender TD5 and the TDCI earlier models did not have these switches and were an optional extra. Now you can replace the blanking switch with one of these new switches. Light on the switch illuminates to show its in use.