-
-
DOOR HINGE KIT Code: DA1305 Front row doors Anodised black finish Set of 4 Defender Series 3 Enhance your Land Rover's appearance! > Replacement anodised door hinges with stainless steel hinge pins > Complete with stainless steel fixings -
-
The all-new Rigid Industries’ Radiance is the perfect solution for those who want Rigid’s legendary quality at a level everyone can attain. The Radiance is built with the same high-grade aluminum alloy housing as our legendary E-Series, but that’s where the visual similarities end. Inside, the Rigid Industries’ Radiance is feature-packed, with a black exposed printed circuit board, optimized forward projecting Broad Spot optics which combine the attributes of a spot and flood beam pattern, and back-lighting available in white, amber, red, blue and green. Large back-lit Rigid branding plates further add to the unique look of the Radiance. The Rigid Industries’ Radiance is for the customer who wants a truly custom look that only Rigid can provide. Available in 10” – 50” lengths, the Rigid Industries‘ Radiance is the perfect entry into Rigid Industries’ performance LED lighting.- *Professional Installation Recommended
- * E-Series Construction & Durability
- *High-grade Aluminum Alloy Housing and Heat Sink
- *Black Powder Coat Finish
- *Black Exposed Printed Circuit Board
- *Back-lighting available in White, Green, Red And Blue
- *Two Rigid Branding Plates with Back-Lighting
- Amber
- Red
- Yellow
- Green
- Blue
10 YEAR WARRANTY
-
-
-
-
-
Full set Land Rover Defender - Bilstein B6 Shock Absorber Kit. Supplied: 2x front gas shock Absorber, 2x rear gas shock Absorber The BILSTEIN B6 shock absorber is the perfect solution if you require more dampening power and efficiency in your suspension setup, including under heavier loads; but don't require a full all-out sports model. BILSTEIN B6 shock absorbers are fully road-tested for road handling capability and endurance. This package of BILSTEIN B6 gas dampers will transform any Defender, providing a vastly improved ride and handling. Much smoother ride with considerably less harshness (potholes and road bumps in the road will be much less noticeable!). Suitable for use with the original springs, or with any of our standard height, or lowering springs that we supply.- Increased power reserves and service life, even when pulling transporters and trailers or during frequent journeys with loads
- Optimum adhesion and enhanced lane change stability in both day to day and extreme situations
- Marked improvement in safety and sportiness without additional spring changes such as lowering your vehicle
- BILSTEIN gas pressure technology
- BILSTEIN mono-tube/Upside-Down technology, made in Germany
- Road-tested by BILSTEIN and fine-tuned
- No German TUV registration required
This item will fit the following model/s:
- Land Rover Defender 90/110
-
-
-
-
-
Land Rover Defender Light Weight Steering Guard Bolwer Used in the Defender Challenge, the lightweight steering guard will offer protection to steering arms and linkages, but also offers access for maintenance. Available in either Black or Graphite, it uses existing mounting points and both colours come with 2 x red towing eyes for recovery work.- Original Bolwer product
- Light weight
- Available in Black or Graphite
- 2 x Red towing eys
-
Land Rover Defender Puma Tdci TD4 2.2 & 2.4 Cruise Control, Fully electronic cruise control to suit both 2.2 & 2.4 Puma Tdci Td4 Defender made from 2002 until 2016 Kit contents- Cruise ECU
- Column mounted control stalk
- Plug & Play throttle T harness
- Simplified Defender specific wiring loom
-
-
-
-
Land Rover Defender Aluminium Window Blocks with LED lights, This Design allows you to mount the LED'S to the windscreen blocks that are machined to take the led lights provided in the kit. This also allows you to hide any wire into the bulk head giving you a neat Finnish.- including 2 LED headlights
- fits all Land Rover Defender 90, 110 and 130, 1988 and up. Other models on request
- includes 2 window blocks and all parts for easy bolt on mounting: stainless steel bolts, sealings, anti-corrosion lube…
- black anodized
- 100% MADE IN GERMANY
-
Protect your sills with these Defender 110 Tube Rock Sliders made from 76mm x 3.2mm Tube, Galvanised and powder-coated in textured Black. Made in the UK to a very high standard, Comes with all fixings. -
-
-
-
Code: DA1472- Defender - 2007 onwards
Enhance your vehicle’s interior with a set of these easy to fit leather cover gear levers!
-
-
-
A rear ladder mounted from Safety Devices’ Defender 90 and 110 roll cage and Defender lower chassis mounting points. Safety Devices are the UK's original designers and manufacturers of roll cages and roof racks for Land Rover. Originally designed for the British Army and the Camel Trophy, today an extensive range of designs are available. The quality is exceptional - cold drawn seamless steel, grit blasted, zinc primed and black powder coated roll cages and roof racks will stand up to the sort of challenges you expect your Land Rover to cope with. Safety Devices offer design excellence, unrivalled quality and a huge choice. > Black Finish -
TUNIT ADVNTAGE II TD5 POWER CHIP Defender / Discovery Tunit V-CR original Power Chip original defender / Discovery Standard BHP 122 / 137 TUNIT ADVANTAGE II BHP 159 / 165TUNIT ADVANTAGE II- PERFORMANCE PLUS SOFTWARE
- 10 POSITION ADJUSTMENT
- ORIGINAL MANUFACTURER'S PLUG
- 2 YEAR ENGINE & DRIVELINE WARRANTY
- 5 YEAR PRODUCT WARRANTY
-
Fed up with winding your windows up and down?
Make life easier, add electric front windows to your Defender with this comprehensive kit. Includes fitting instructions. -
The TD5 Ceramic clutch Fitted with an 8 paddle ceramic rigid drive plate, gives you an increase in up-take of 40% from the peddle, meaning the clutch grips and moves faster than the HD organic kit, meaning the Clutch cover itself is doing less work. Suitable to run with DMF. Needs 500 miles of soft driving at 1/4 throttle to allow all faces to mate and bed correctly. Failure to do so will end in a glazed drive plate and slip.The Clutch is Supplied with the Following: 1 x Clutch Plate 1 x Clutch Cover 1 x Bearing -
-
-
Treesliders Rocksliders Sill Footsteps Defender 110 – Pair COD: DUM0003 Hardy and comfortable Treeslider, with just one component you will have three major uses: Footsteps, Treeslider and Sill -
Code: DA1350BlackMade in the UK exclusive for Bowler, these lightweight, high strength wheels are TUV tested and are used in the Defender Challenge. They are 7.5" wide and will accept tyres ranging from 235 - 265 wide (including the standard 16" Land Rover options of Continental Cross Contacts or Goodyear MTR). Maximum load rating 1,250kg. -
-
Code: DA5051- Defender - 2007 onwards
A great replacement for your standard Defender gear lever. These polished aluminium gear levers are easy to fit with no modifications required. Just remove the plastic from the existing levers and swap with these high quality replacements. -
-
-
ARB DELUXE AWNING ROOM WITH FLOOR Code: DA1466 2,500 x 2,500mm Designed to function as a fully enclosed room or mosquito net, the new ARB deluxe awning room with floor provides protection from the weather, insects and provides additional privacy. Easy and quick to set up the ARB deluxe awning room can be used with 2500 and 2000 model awnings and features a durable waterproof floor and its own separate ceiling to help keep you cooler. All main wall panels incorporate zipper operated two way solid and mesh access doors for easy access and to accommodate changing weather conditions. Vehicle wall is solid zipper wall only. Note - Kit does not include the awning. > Keep dry with waterproof walls made from Oxford Polyester > Long product life and sun protection thanks to UV treated materials > Enjoy a ‘bug-free’ environment with ultra-fine insect mesh > Heavy duty yet lightweight waterproof floor means a dry ground and compact storage > Organiser pockets perfect for phones, magazines and sunblock > Comes complete with guy ropes and steel pegs > Cable access ports for high mounted lighting solutions -
-
-
The all-new Rigid Industries’ Radiance is the perfect solution for those who want Rigid’s legendary quality at a level everyone can attain. The Radiance is built with the same high-grade aluminum alloy housing as our legendary E-Series, but that’s where the visual similarities end. Inside, the Rigid Industries’ Radiance is feature-packed, with a black exposed printed circuit board, optimized forward projecting Broad Spot optics which combine the attributes of a spot and flood beam pattern, and back-lighting available in white, amber, red, blue and green. Large back-lit Rigid branding plates further add to the unique look of the Radiance. The Rigid Industries’ Radiance is for the customer who wants a truly custom look that only Rigid can provide. Available in 10” – 50” lengths, the Rigid Industries‘ Radiance is the perfect entry into Rigid Industries’ performance LED lighting.- *Professional Installation Recommended
- * E-Series Construction & Durability
- *High-grade Aluminum Alloy Housing and Heat Sink
- *Black Powder Coat Finish
- *Black Exposed Printed Circuit Board
- *Back-lighting available in White, Green, Red And Blue
- *Two Rigid Branding Plates with Back-Lighting
- Amber
- Red
- Yellow
- Green
- Blue
10 YEAR WARRANTY
-
-
-
Defender / Discovery Tunit V-CR original Power Chip original defender / Discovery Standard BHP 122 / 137 TUNIT V-CR original BHP 145 / 160Original TUNIT V-PD- ORIGINAL MANUFACTURER'S PLUG
- 10 POSITION ADJUSTMENT
- 3 YEAR PRODUCT WARRANTY
- 1 YEAR ENGINE & DRIVELINE WARRANTY
-
Land Rover Defender ROADspec TDCI Puma clutch is designed specifically for your Daily road going truck. If you do a bit of towing now and then, perhaps some light green laning or just use your truck as your commuter then the INTRAspec has everything you need to keep you going for years to come. It’ll even take mildly tuned motors that have a little extra poke than standard! This kit includes the released bearing/concentric slave cylinder unit
Description
INTRAspec TDCI Puma- S-HDTF Friction Material
- High Torque Sprung Centre Hub
- Anti-Rattle Spring Modification
- G90 High Temp Assembly Grease
- Release Bearing
-
Protect your sills with these Defender 110 Tube Rock Sliders made from 76mm x 3.2mm Tube, Galvanised and powder-coated in textured Black. Made in the UK to a very high standard, Comes with all fixings. -
Wildbear Discovery 2 LED light winch Bumper is made from 5 mm Plate, shot blasted and primed and powder-coated in Black. Manufactured in the UK to the highest standard and Comes with Cree LEDS. The design of lights have change to square ones. shackle pins and recovery eyes are listed on other page.- shot blasted and primed
- powder coated in black
- comes with led lights
- all fixings come with bumper to mount
- holes for shackle pins ( sold separate )
- hole pre drilled for water bottle guards that are also sold seperat
Call Us Today! +6012-220 5085|sales@defenderupgrades.com.my
