• Labcraft has unveiled their new slimline SI7 LED Scenelite; a more compact design without any compromise on light output. The SI7 Scenelite projects an amazing 85 lumens per watt, compared to only around 30 lumens for halogen scenelite lights. The SI7 LED Scenelite has been designed using a unique curved PCB which angles the light along the curvature of the robust aluminium base (which also acts as a highly effective heat sink), giving a wider spread of light. The SI7 uses approximately 80% less power than standard halogen lights, therefore battery life will be increased allowing the lights to remain working for longer. This 1068 lumen device has been manufactured and testing to a rating of IP67, making it suitable for tough internal and external conditions, and therefore also protected against pressure washing.
    Additional Information:
    • 5 x Long Life CREE Power High Intensity LEDs Producing a Clean White Light
    • Solid Aluminium Casing
    • Unique Curved PCB
    • LED Power 5 x 2.5W
    • 1420 Lumens
    • 10 Year Warranty
    • 0.3kg Weight
    • Waterproof to IP66
    • Operating Temperature -30/+40
    • 10-32v Voltage Range
    • 1.25A (12v) 0.6A (24v) Average Current
     
  • FRONT LAMP GUARDS Code: RTC8969 Rectangular Pair Defender - up to 2A622423 Protect those valuable lights from accidental damage either on or off-road!
  • The Syncro Gearboxes’ Slickshift is easy to fit and allows you to use your original gear stick.  Within thirty minutes you can have a more modern feeling Defender, with gear selections similar to newer vehicles. A new innovative design exclusive to Syncro Gearboxes, the Land Rover Defender LT77/R380 Slickshift improves gear change by reducing sloppiness and minimising travel, as well as neatening shifts giving smoother gear changes.
  • The Syncro Gearboxes’ Slickshift is easy to fit and allows you to use your original gear stick.  Within thirty minutes you can have a more modern feeling Defender, with gear selections similar to newer vehicles. A new innovative design exclusive to Syncro Gearboxes, the Land Rover Defender LT77/R380 Slickshift improves gear change by reducing sloppiness and minimising travel, as well as neatening shifts giving smoother gear changes.

    The Syncro Gearboxes’ Slickshift is easy to fit and allows you to use your original gear stick.  Within thirty minutes you can have a more modern feeling Defender, with gear selections similar to newer vehicles.

    The Slickshift from Syncro Gearboxes is a direct replacement for the existing pivot pin. Included in the kit is the custom design CNC machines pivot pin and anodised aluminium spacer plate as well as 4 new BZP 8mm bolts. Also included in the kit is a new CNC nylon cup to replace your old worn out one. For Defender LT77 & R380 ONLY (inc TD5 Defender) You’ll only need a pair of circlip pliers, a screw driver, 17mm, 13mm, and 10mm spanners for fitting. Can be fitted in situ’ within 30 mins. 2 spanner difficulty rating KIT CONTENTS 1 X CUSTOM SYNCRO GEARBOXES CNC MACHINES PIVOT PIN SHIFTER 1 X ANODISED ALUMINIUM CNC MACHINED SPACER 4 X M8 BOLTS 4 X M8 WASHERS 1 X CUSTOM SYNCRO GEABOXES CNC MACHINED NYLON CUP
  • Replacement aluminium Header Tank expansion reservoir from AlliSport Ltd. Black Powder Coated Designed to replace the original plastic item. Covers all Land Rover Tdi model vehicles – (Discovery 200 and 300 and Defender 200 and 300). Also suits the Defender, Discovery 1 and Range Rover V8.    The original plastic items are prone to splitting along the seam caused by the constant heating and cooling. This upgrade eliminates the problem and also aids cooling. We manufacture the tank with high quality CNC stamp cut 2mm aluminium and is fully TIG welded by hand in house. Swaged pipe connections for extra pipe security. This tank uses the original mounts and hose connections and has been designed to take the original Land Rover pressure cap. Be aware that some other tanks use a sealed aluminium cap which does not allow for pressure release.
  • Replacement aluminium Header Tank expansion reservoir with sight gauge from AlliSport Ltd. Designed to replace the original plastic item. Covers all Land Rover Tdi model vehicles – (Discovery 200 and 300 and Defender 200 and 300). Also suits the Defender, Discovery 1 and Range Rover V8.    The original plastic items are prone to splitting along the seam caused by the constant heating and cooling. This upgrade eliminates the problem and also aids cooling. We manufacture the tank with high quality CNC stamp cut 2mm aluminium and is fully TIG welded by hand in house. Swaged pipe connections for extra pipe security. This tank uses the original mounts and hose connections and has been designed to take the original Land Rover pressure cap. Be aware that some other tanks use a sealed aluminium cap which does not allow for pressure release.
  • Transform the look of your defender with this easy fit land rover adventure grille for defenders. Just need to attach with 6 fir tree clips and your away creating a great new look to your defender. Made from ABS plastic in gloss black finish. This Grille can be retro fitted on to all Air-Con and Non Air-Con Models - Grille Badge Not Supplied
    1. Easy to fit
    2. made from ABS plastic so strong and robust
    3. cheaper than the original
    4. available in carbon look too.
    5. tdci air con grills also available on separate listings

    Land Rover Adventure Grille - To Fit

    Defender 90 Defender 110
  • Land Rover Defender pre TD5 aluminium fuel caps in black to give your truck that TDCI cap look. Replace your old worn out plastic cap and replace with this nice looking anodised black aluminium cap.
  • Full set Land Rover Defender - Bilstein B6 Shock Absorber Kit. Supplied: 2x front gas shock Absorber, 2x rear gas shock Absorber The BILSTEIN B6 shock absorber is the perfect solution if you require more dampening power and efficiency in your suspension setup, including under heavier loads; but don't require a full all-out sports model. BILSTEIN B6 shock absorbers are fully road-tested for road handling capability and endurance. This package of BILSTEIN B6 gas dampers will transform any Defender, providing a vastly improved ride and handling. Much smoother ride with considerably less harshness (potholes and road bumps in the road will be much less noticeable!). Suitable for use with the original springs, or with any of our standard height, or lowering springs that we supply.
    • Increased power reserves and service life, even when pulling transporters and trailers or during frequent journeys with loads
    • Optimum adhesion and enhanced lane change stability in both day to day and extreme situations
    • Marked improvement in safety and sportiness without additional spring changes such as lowering your vehicle
    • BILSTEIN gas pressure technology
    • BILSTEIN mono-tube/Upside-Down technology, made in Germany
    • Road-tested by BILSTEIN and fine-tuned
    • No German TUV registration required

    This item will fit the following model/s:

    • Land Rover Defender 90/110
  • Land Rover Defender 110 ‘Ebony’ side steps (‘Fire and Ice’ style with all black treadplate) These chunky ‘Ebony and Ivory’ sidesteps not only look great with an attractive brushed stainless steel tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 90 also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Land rover. If an unsightly LPG tank is fitted to your vehicle the sidestep can help to disguise it.

    selling points

    • Bolt on design, no drilling required. Fitted in minutes.
    • Unique chassis clamps attach to chassis outriggers using one spanner
    • Makes getting into or out of your vehicle easier
    • Constructed of heavy duty steel, powder coated and topped with an attractive brushed stainless steel tread plate.
    • Price is per pair.
    • Full fitting instructions with diagrams included
    • Full 12 month warranty & the highest quality from the UK market leader – UK made!
    • powder coating to enhance durability & wear.
    • Please note: steps are not warranted for off road use. Off road use voids guarantee.
  • Land Rover Defender 110 Fixed Panoramic Privacy Glass Kits ,These panoramic window trim kits will transom the look of your truck to the 20th century, give the defender a wow factor and will defiantly turn peoples heads. Product include s:
    • Glue kits
    • Instructions
    • 2 x Side glass panels ( 1 x Left + 1 x Right as described )
    • 2 x Rear back quarter panels ( 1 x Left + 1 x Right as described )
    Additional information:
    • Heat reflective panels
    • 90% Privacy glass
    • insurance approved
    • EU / Dot marked and tested
    • High quality finish
    Related products:
    • Internal trim edge
    • CSW interior finishing rubber trim
    • Black / Grey / light Grey window trim kits
  • Land Rover Defender 110 Rear Window Regulator Kit, now you can covert the window winders to the electric version and be in control of the windows. the kit comes with loom / switches and full video guide of fitting the item. replace the old wind down windows to the more modern technology of electric windows

    Contents of kit.

    • it would be composed by 2 window Regulators with motors
    • 2 switches
    • 1 switch holder
    • 1 full electrical harness included relays and safety breaker
    • screws and fixings.
  • Land Rover Defender 110 side steps

    RM1,715.00RM1,822.00
    Land Rover Defender 110 side steps , Black powder coated with either rubber tread plate or silver chequer plate, these side steps are a great addition to your landy, easy to fit as uses existing mounts. manufactured in the UK to a high standard.
  • These chunky sidesteps not only look great but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Land Rover also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Land Rover.
    • QuickTread brand – made in the UK.
    • Bolt on design, no drilling required. Fitted in minutes.
    • Unique chassis clamps attach to chassis outriggers using one spanner
    • Makes getting into or out of your vehicle easier
    • Constructed of heavy duty steel, powder coated and topped with an attractive brushed stainless steel tread plate.
    • Price is per pair.
    • Full 12 month warranty & the highest quality from the UK market leader – UK made!
    • QuickTread means quick fitting – only 5-10 minutes per side*
    • Please note: steps are not warranted for off road use. Off road use voids guarantee.
    *Note: this is an estimate based on the length of time it takes our fitters.
  • Land Rover Defender 2.2 TDCI Service Kit OE Parts , comes with all OE filters and parts.
    1. 2.2 PUMA FROM DA444247
    2. OE Service Kits