• Power:60W Color Temperature:6000K-6500K Leds: 6pcs 10w Osram LED Bezel Color:CHROME Voltage:12-30V DC Luminous FLux:3400LM@hih beam,2800LM@low beam MATERIAL:Diecast Aluminum Housing WATERPROOF RATE:IP67 LENS:PC
  • Land Rover Defender Carbon Fibre look Single Din Facia. Advantages over standard facia is the top vents Move up and down to direct cold / warm  air away from you. also comes with heater decals and in other colour options available in Gloss Black / Carbon / Red / White
  • Optimill wheel spacers. 30mm hub centric wheel spacers manufactured from billet aluminium. Fits all Land rover Defender models. Comes as a set of 4 with OEM Land rover studs pressed into the back. Spacers are used to give a wider stance and to give the vehicle more lock when wider wheels have been fitted, as the tyres rub and need more clearance.
  • Alternator for Defender Puma 2.4 TD4 Engine Part Number: YLE500310
    PART NUMBER ALT487CP
    DESCRIPTION: BOSCH 0121615
    VOLTAGE: 12V
    OUTPUT: 150A
    REGULATOR: INTERNAL
    PULLEY TYPE: PVR7, CLUTCH PULLEY
    FAN: IF
    AVAILABILITY: IN STOCK
  • DOOR HINGE KIT Code: DA1275 2nd row doors Torx head bolts Zinc plated finish Set of 4 Defender Series 3 Defender 2007 onwards but can be used on earlier vehicles. Enhance your Land Rover's appearance! > Replacement zinc plated door hinges with torx head bolts and all other fixings > Complete with torx head bolt fixings
  • SAFETY DEVICES ROLL CAGE PADDING KIT Code: RBL1387PAD Black Defender 90 - Station Wagon without bulkhead, 2-door Padding kit for internal section of RBL1387SSS roll cage Unrivalled quality... Specially formulated polyurethane flame retardant padding kits of 55 Shore hardness. Kit covers all internal roll cage components above shoulder height.
  • OLD MAN EMU COIL SPRINGS Code: DA8912 Rear Lift - Up to 40mm Defender - 90 Discovery 1 Discovery 2 Range Rover Classic Spring rate - 300/340lbf/in / 52/60N/mm Free height - 420mm Defender - 90. Load - 200kgs Discovery 1. Load - 100kgs Discovery 2. Load - 100kgs Range Rover Classic. Load - 100kgs > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
  • BRITPART PERFORMANCE LIFTED SPRINGS Code: DA4208 Rear pair Lift - 50mm Load - 500kg Defender 110 Defender 130 Bar diameter - 21mm Rate - 420lbs/in Free height - 445mm The right choice when replacing the old sagging original springs! Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases.
  • Land Rover Defender Aluminium Roof Bars Fully Constructed from aluminium, the Defender Upgrades  roof bar is light-weight and strong , finished in a  black textured powder coating providing great looks, practical in use (grip) and a durable finish. All our roof bars, have an incorporated T-slot system which allows the easy fitment of accessories both on top , and underneath the roof bar meaning endless options and is fully customisable depending on your needs. you can even add your work lights to these bars too. The Kit Includes two Bars in each kit with all fixings and comes with 4 eyelets. Can be used with a roof tent but we advise you use 4 bars.
    1. Made from Aluminium
    2. Comes with all fixings
    3. 4 x eyelets for strapping
    4.  rubber feet to protect paint work
    5. no drilling required
  • Land rover Defender anti-rattle-kit-rear-sliding-windows proprietary rubberised window channel replaces the inferior factory felt lining in Land Rover® Defender rear sliding side windows and eliminates the famous glass 'chatter' common in these vehicles. Made from virgin (non-recycled) EPDM rubber for it's superior temperature and weather resistance, our window channel is impervious to ozone, making it fade-resistant. Upper flanges wrap out and around the window frame edge, so the glass never comes into contact with the metal, eliminating rattles. Inner surfaces are flocked to reduce friction allowing the window glass to slide freely in the channel. This kit is a complete solution, with enough window channel and rivets to restore both your driver and passenger side rear sliding windows. As an added touch, the kit also includes the correct #2 Pozidriv® ACR bit which prevents stripping of the hard-to-find screws that hold the window frame together.
    • 2 x 5-ft Flocked Rubber Extrusions
    • 50 x Sealed POP Rivets
    • 1 x bottle of GooGone®
    • 1 x 3M® Final Stripping Pad
    • 1 x Wooden Width Gauge Disc
    • 1 x #2 Pozidriv® ACR Bit
    • 1 x Full-Color Installation Guide
    FEATURES   
    • Custom designed for Land Rover® Defender rear sliding side windows
    • Tight, stay-put fit
    • Wrap-around design covers aluminium edges
    • EPDM Rubber
    • Flocked inner surfaces

    BENEFITS

    • Cushions glass when closing windows
    • Seals out moisture, dust and drafts
    • Eliminates rattles
    • Fade, tear and temperature resistant
    • Glass slides freely in channel
  • The Utility-45 is a heavy duty LED work light which combines the latest and most advanced LED systems with patent-pending design features for maximising light output, functionality, and reliability. 4 high density LEDs deliver outstanding levels of night-time illumination, with a colour temperature of 5,000 kelvin, carefully selected to maximise definition while reducing fatigue and strain that can come from using higher colour ranges. An innovative CAE optimised 'Matrix' cooling system increases surface area so that heat generated during operation of the lamp is more efficiently dissipated away from the unit, allowing the light output to be maximised for longer, simultaneously the Electronic Thermal Management system optimises light output considering the environmental and thermal conditions of the lamp. The Utility-45 comes available with 3 different lens options - Standard Diffused lens, providing a good balance of spread and intensity of light for the majority of tasks; Wide Diffused, for exceptional short-range visibility; and Dual-Zone Reeded, ideal if the lamps are going to be mounted less than 1m above the ground. Lenses are easily interchanged while maintaining the lamps IP67/IP69K rating. Built to last with a 2 year warranty as standard, the Utility-45 benefits from automotive grade corrosion resistance, while the integrity and functionality of the lamp is further enhanced through EMC protection which ensures no interference with any other electrical machinery or appliances. Over voltage and reverse polarity protection will further guard against accidental damage and increase the longevity of the lamp. Supplied with male/female Deutsch connectors (part no. DT06-2S/DT04-2P), optional extras include: a One-Lamp Wiring Harness Kit, and Quad-Core Dampening System to protect against extreme vibrations. Key Features * Fully ECE approved Work Light * 2 Year warranty * Made in Britain * CAE optimised 'Matrix' cooling system * Optional interchangeable lenses * Electronic thermal management * IP67/IP69K watertight * Automotive grade corrosion resistance * 5,000 kelvin light temperature for maximum definition * EMC protected - CISPR 25: 2008 * Over voltage protected * Reverse polarity protected * Male and female Deutsch connectors included * Optional Quad Core Dampening System protects against vibration