Code: DA1203
- Defender - 2002 onwards
-
-
-
-
-
Code: DA1350BlackMade in the UK exclusive for Bowler, these lightweight, high strength wheels are TUV tested and are used in the Defender Challenge. They are 7.5" wide and will accept tyres ranging from 235 - 265 wide (including the standard 16" Land Rover options of Continental Cross Contacts or Goodyear MTR). Maximum load rating 1,250kg. -
-
-
Enhance your Defender's appearance!
Made from GRP (glass-reinforced plastic AKA fibreglass) this Defender Puma bonnet is half the weight of the original Land Rover bonnets. The bonnet has return edges on all four sides underneath for strength and to make it more rigid. It has strengthened hinge points and is supplied with stainless steel hinge-bolts & screws.Code: DA1963White- Defender 90 - 1984 onwards
- Defender 110 - 1983 onwards
-
-
-
Code: DA2067Single Natural aluminium finish- Defender - without wiper
- Series - without wiper
Add some heavy-duty protection to your Land Rover!
-
Code: DA2068Single Natural aluminium finish- Defender - with wiper - late
Add some heavy-duty protection to your Land Rover!
-
Code: DA2250BElectroplate finish- Defender
- Discovery 1
- Range Rover Classic
Give your vehicle some extra protection with a diff guard.
This guard is simple to fit (no drilling) and has the added advantage of having the fill plugs accessible at all times. -
Code: DA2390Don’t get caught out with a flat tyre or two!
Pack and leave an easy to use Britpart tyre repair kit* in your vehicle. How It Works 1. Find and remove the item that caused the puncture. 2. Apply rubber solution to the reamer tool then push the reamer into the puncture and work up and down until the reamer moves easily in the hole. 3. Thread one rubber tyre plug in the hook tool. 4. Push the rubber tyre plug into the hole until ½" of the tyre plug remains outside the tyre then turn the hook tool a quarter turn and pull out slowly. 5. Cut off the excess tyre plug as close to the tyre as possible. 6. If the puncture is too big have the tyre fixed by a professional. *Recommended for off-road use only -
-
Code: DA2440 Front - RHS Manual window Black Defender - 1987 up to 5A689036 Replace your Defender's old tatty door cards with one of these smart plastic replacements. Easy to fit they are also easy to keep clean with a wipe clean finish. Includes fasteners. -
Code: DA2441 Front - LHS Manual window Black Defender - 1987 up to 5A689036 Replace your Defender's old tatty door cards with one of these smart plastic replacements. Easy to fit they are also easy to keep clean with a wipe clean finish. Includes fasteners. -
Code: DA2480 Rear - RHS Manual window Black Defender Replace your Defender's old tatty door cards with one of these smart plastic replacements. Easy to fit they are also easy to keep clean with a wipe clean finish. Includes fasteners. -
Code: DA2481 Rear - LHS Manual window Black Defender Replace your Defender's old tatty door cards with one of these smart plastic replacements. Easy to fit they are also easy to keep clean with a wipe clean finish. Includes fasteners. -
Code: DA2499 3 piece door lock button kit Defender -
Code: DA2603 Normal interior finish fascia plate Suitable for right & left hand drive models Defender - 2007 onwards Neat storage solution. This glove box is for the new Defender which utilises the available dashboard space. Ideal for storing all the usual small items you carry with you. Robust construction and easy to fit with all the necessary parts supplied. -
Code: DA2603CFCarbon fibre effect finish facia plate Suitable for right & left hand drive models- Defender - 2007 onwards
Neat storage solution.
This glove box is for the new Defender which utilises the available dashboard space. Ideal for storing all the usual small items you carry with you. Robust construction and easy to fit with all the necessary parts supplied. -
New black mesh trim Defender 'Chubby' box Extra padded lid! Fitting a Britpart ‘Chubby’ box in your Land Rover will not only help you keep your vehicle clutter free but it will also make driving more of a pleasure with the extra padded lid. Our standard cubby boxes have a 20mm thick lid while the ‘Chubby’ boxes have a lovely thick and comfy 80mm thick lid. With a double cup holder as standard, split drinks are a thing of the past. Hand-built in the UK, these quality cubby boxes are suitable for Series 3 and Defenders. Well crafted with precision tools using a hard wearing leatherette outer with locking stay brass hinges. Top - Black mesh Body - Black For Defender For Series 3 -
-
-
Safari snorkels are manufactured to the highest standards in durable, UV stable, cross linked polyethylene material.
Pioneered in Australia in the early 1980’s, Safari Snorkels were born out of a need to protect 4WD engines from the hazards of dust and water commonly encountered in touring and off road applications. Safari snorkels are manufactured to the highest standards in durable, UV stable, cross linked polyethylene material, using stainless steel hardware where appropriate. Each system includes quality fixtures and fittings, which offer superior sealing, presentation and long-term durability. In arguably the best, if not toughest environment, Safari Snorkel Systems are thoroughly researched, tested and tooled for each model of Land Rover.The Safari Snorkel delivers a continuous and cooler supply of air for maximum engine performance. It is positively sealed as well to ensure the best protection against deep water crossings and dust. Note - Fitment from seated internal view. -
-
-
-
Satin black finish Pair- Defender
Add some heavy-duty protection to your Land Rover!
-
Code: DA4049SPainted silver finish Pair- Defender
Add some heavy-duty protection to your Land Rover!
-
Code: DA4071Pair Natural aluminium finish- Defender 110
Add some heavy-duty protection to your Land Rover!
-
Code: DA4071BPair Satin black finish- Defender 110
Add some heavy-duty protection to your Land Rover!
-
Code: DA4100Pair Natural aluminium finish- Defender 110
Add some heavy-duty protection to your Land Rover!
-
Code: DA4100BPair Satin black finish- Defender 110
Add some heavy-duty protection to your Land Rover!
-
-
Code: DA4260Corresponds to ESR4238- Defender 90/110/130 - Td5 - 1999 - 2007
- Discovery 2 - 4.0i - 1999 - 2004
- Discovery 2 - Td5 - 1999 - 2004
- Freelander 1 - V6 petrol
- Range Rover P38 - diesel from WA376580
- Range Rover P38 - diesel from TA346794 up to VA376579
- Range Rover P38 - petrol from XA410482
- Range Rover P38 - petrol from VA346794 up to VA376579
- Range Rover P38 - petrol from WA385949 up to WA410481
A breath of fresh air for your Land Rover
> Tailored to fit your Land Rover > Maximum breathing efficiency for your engine means more power or better fuel mileage > No compromise on quality - the engine gets more air but the dirt particles are trapped by the quality filters > No need to replace as easy cleaning means maximum performance guaranteed > Easy fit, directly replaces standard air filter > Ideal for use in hot dusty conditions to reduce engine wear > Compatible with snorkels, ideal for use in conjunction with other performance modifications > Filters don't need pre-oiling and if the filter gets dirty there is no need to use a cleaner to clear the dirt on the filter - just use air, water or detergentBreathing efficiency for your engine means more power or better fuel mileage
-
Code: DA4368Heavy-duty Kit includes Plus 5" shock absorbers*- Defender 110 - from 1994 - wide bush
Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for!
Kit contents - > Springs - front & rear - pair > Britpart Cellular Dynamic Shock Absorbers - front & rear - pair > Radius arms - front & rear > Spring retainers - front & rear > Bush sets -
Code: DA4379Corresponds to PHE500060- Defender - from 2007 onwards
A breath of fresh air for your Land Rover
> Tailored to fit your Land Rover > Maximum breathing efficiency for your engine means more power or better fuel mileage > No compromise on quality - the engine gets more air but the dirt particles are trapped by the quality filters > No need to replace as easy cleaning means maximum performance guaranteed > Easy fit, directly replaces standard air filter > Ideal for use in hot dusty conditions to reduce engine wear > Compatible with snorkels, ideal for use in conjunction with other performance modifications > Filters don't need pre-oiling and if the filter gets dirty there is no need to use a cleaner to clear the dirt on the filter - just use air, water or detergentBreathing efficiency for your engine means more power or better fuel mileage
-
Code: DA45871,210mm long x 325mm wide x 60mm deep Max load - 3.5 tons Plastic Sold as a pair -
Code: DA4599Solves the problem of that crude and annoying blast of hot air to your lower legs.- Defender - 2007 onwards
The MUD Heater Deflector solves the problem of that crude and annoying blast of hot air to your lower legs in all Puma engine Defenders. The Heater Deflector redirects the flow of air from the lower heater outlets forwards into the footwell, rather than directly at your legs to create a more comfortable driving environment. The Heater Deflector moulding fixes easily in place using the supplied push-fit fasteners and can be fitted in 5-minutes. All you need is a 4.5mm drill. Position the Heater Deflector, drill the fixing holes in the lower dash section and fix the Heater Deflector in place using the push-fit fasteners. -
Code: DA4629Grey- Defender - except sunroof equipped models
Designed with CAD software.
> Supplied with interior lamp extension loom and DIN blanking panel. > Fitting kit and instructions are also supplied. The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines. The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product. It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts. Will the Defender roof console fit my vehicle? The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification. -
Code: DA4629BBlack- Defender - except sunroof equipped models
Designed with CAD software.
> Supplied with interior lamp extension loom and DIN blanking panel. > Fitting kit and instructions are also supplied. The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines. The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product. It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts. Will the Defender roof console fit my vehicle? The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification. -
Code: DA4649 Black Defender Suitable for 1 door -
-
-
Code: DA4715Long luggage rail Roll cage mount 2.8m x 1.4m / 40kgs- Defender 110 - hard top & station wagon
4 roof cross rails as standard and can accommodate 3 additional roof cross rails. Long luggage rail with rain gutter mount, ideal for front or back loaded tents. Refer to owners handbook for recommended maximum weight.Heavy-duty steel roof rack.
> The standard pack includes a steel roof rack, fixing bolts and optional roof cross rails. > Roof racks are grit blasted, primed with a zinc enriched powder undercoat, and finished with a durable black powder coat. > Not compatible with a sunroof. > Tents can normally be affixed to the roof rack without a floor, although a marine ply non-slip floor is also available. > Additional roof cross rails are available to purchase for use without a roof rack for use as, for example, a roof bar, basic tent support, attaching a roof storage box or to spread additional load on the Safety Devices' roof racks. -
