-
OLD MAN EMU SHOCK ABSORBER Code: DA8921 Rear Defender - 90 & 110 Discovery 1 Range Rover Classic Open length - 560mm Closed length - 346mm Nitrocharger Sport shock absorbers introduces advanced dual-stack deflective disc technology that continuously adapts to the terrain, offering rapid response improvements to ride quality, handling and control. Available in the UK only. Features > Interactive, multi-stacked rebound and compression valving systems ensure optimal damping performance in all conditions. > Vehicle specific fine tuning for superior handling and ride performance. > Piston rod ‘slip ring’ provides more consistent and uniform damping performance. > Triple lipped oil seal with gas retention check valve design virtually eliminates contaminant damage and gas loss. > Impact resistant polymer dirt shield. > Balanced, 35mm Telfon banded piston assembly. > Teflon coated low friction glacier piston rod guide. > 18-25mm induction hardened chrome piston rod. > High quality replacement mounting bushes. > Australian made and engineered. Lower Bush Mounting Kit - DA6806 -
OLD MAN EMU SHOCK ABSORBER Code: DA8913 REAR PAIR Defender - 90 & 110 - heavy-duty Defender - 130 Discovery 1 - heavy-duty Range Rover Classic - heavy-duty Open length - 560mm Closed length - 346mm Nitrocharger Sport shock absorbers introduces advanced dual-stack deflective disc technology that continuously adapts to the terrain, offering rapid response improvements to ride quality, handling and control. Available in the UK only. Features > Interactive, multi-stacked rebound and compression valving systems ensure optimal damping performance in all conditions. > Vehicle specific fine tuning for superior handling and ride performance. > Piston rod ‘slip ring’ provides more consistent and uniform damping performance. > Triple lipped oil seal with gas retention check valve design virtually eliminates contaminant damage and gas loss. > Impact resistant polymer dirt shield. > Balanced, 35mm Teflon banded piston assembly. > Teflon coated low friction glacier piston rod guide. > 18-25mm induction hardened chrome piston rod. > High quality replacement mounting bushes. > Australian made and engineered. Lower Bush Mount Kit - DA6806
-
SWING AWAY REAR DOOR MOUNT SPARE WHEEL CARRIER Code: DA2232 Defender - all models Series -
Enhance the look of your Defender by fitting the top of the range SVX front grille. Molded from AB plastic (no fiberglass) as original manufacturer. Fantastic quality and easy to fit The SVX Land Rover Defender was a special edition 60th anniversary model from Land Rover and the front grille kits are now hard to find. Suitable for cars with or without air conditioning. This is a quality aftermarket product finished in Gloss Black paint with a protective lacquer coating Fits: Land Rover 90/110 (including 2.5N/A, 2.5 Turbo, V8) Land Rover 90/110 Defender 200 Tdi Land Rover 90/110 Defender 300 Tdi Land Rover 90/110 Defender Td5 Land Rover 90/110 Transit engine Package Contents:- 1x Front Grille
- 1x LHS Headlight Surround
- 1x RHS Headlight Surround
- 2x Inner Headlight Brackets
-
Enhance the look of your Defender by fitting the top of the range SVX front grille. Molded from AB plastic (no fiberglass) as original manufacturer. Fantastic quality and easy to fit The SVX Land Rover Defender was a special edition 60th anniversary model from Land Rover and the front grille kits are now hard to find. Suitable for cars with or without air conditioning. This is a quality aftermarket product finished in Silver paint with a protective lacquer coating Fits: Land Rover 90/110 (including 2.5N/A, 2.5 Turbo, V8) Land Rover 90/110 Defender 200 Tdi Land Rover 90/110 Defender 300 Tdi Land Rover 90/110 Defender Td5 Land Rover 90/110 Transit engine -
The all-new Rigid Industries’ Radiance is the perfect solution for those who want Rigid’s legendary quality at a level everyone can attain. The Radiance is built with the same high-grade aluminum alloy housing as our legendary E-Series, but that’s where the visual similarities end. Inside, the Rigid Industries’ Radiance is feature-packed, with a black exposed printed circuit board, optimized forward projecting Broad Spot optics which combine the attributes of a spot and flood beam pattern, and back-lighting available in white, amber, red, blue and green. Large back-lit Rigid branding plates further add to the unique look of the Radiance. The Rigid Industries’ Radiance is for the customer who wants a truly custom look that only Rigid can provide. Available in 10” – 50” lengths, the Rigid Industries‘ Radiance is the perfect entry into Rigid Industries’ performance LED lighting.- *Professional Installation Recommended
- * E-Series Construction & Durability
- *High-grade Aluminum Alloy Housing and Heat Sink
- *Black Powder Coat Finish
- *Black Exposed Printed Circuit Board
- *Back-lighting available in White, Green, Red And Blue
- *Two Rigid Branding Plates with Back-Lighting
- Amber
- Red
- Yellow
- Green
- Blue
10 YEAR WARRANTY
-
Land Rover Defender 30mm Front Anti Roll bar 90/110 with SuperPro bush kit to help give your Land Rover a much sharper turn in, and give you much more confidence on the road. We recommend you use a lowering spring and also the Bilstien shocks we can offer. If your looking for that all round shock set up then i recommend this kit.- 1 x front Antiroll bar 30MM 90/110
- 1 x front SuperPro bush kit
-
-
-
Defender 90 Window Trim Kit 2007 with cutouts for windows Comes with 2 sides and 2 rear window quarters, These are direct replacements for the original panels and made to a very good quality. Slightly stiffer than the original but fit perfect. These are for the 2007 on models but will fit the early vehicles with some light trimming to the bottom part where it goes around the Bulk head. Also has the rear seat belt holes to allow you to out in rear seats if not already have them. with these window trims you will smarten the look of your truck. quick and easy to fit with dramatic changes in minutes. we also sell the aluminium Grab handles and cargo netting if needed, please check out our other listings or click on the link below.- Rear side window internal trims AND quarterlight internal trims (4 pieces - see thumbnails)
- DIY installation in under an hour. (Fitting service available.)
- Ideal for replacing worn trim kits or converting a panel-van into a County spec.
- Equivalent to official Land Rover part numbers EQT500480LOY, EQT500490LOY, EQT500620LOY, EQT500630LOY
- 3 colour options Black / Grey / Light Grey
-
Defender 90 Window Trim Kit 2007 without cutouts for windows Comes with 2 sides and 2 rear window quarters, These are direct replacements for the original panels and made to a very good quality. Slightly stiffer than the original but fit perfect. These are for the 2007 on models but will fit the early vehicles with some light trimming to the bottom part where it goes around the Bulk head. Also has the rear seat belt holes to allow you to out in rear seats if not already have them.- Rear side window internal trims AND quarterlight internal trims (4 pieces - see thumbnails)
- DIY installation in under an hour. (Fitting service available.)
- Ideal for replacing worn trim kits or converting a panel-van into a County spec.
- Equivalent to official Land Rover part numbers EQT500480LOY, EQT500490LOY, EQT500620LOY, EQT500630LOY
- 3 colour options Black / Grey / Light Grey
-
GRILLE & HEADLAMP SURROUND SET Code: DA1357 Santorini Black Defender Enhance your Defender's appearance! Land Rover Defender Standard Grille Gloss black Finish. will transform your truck instantly, The one piece radiator frame grille with its honeycomb front is defiantly one of the nicest grilles on the market place. Does not come with badge -
-
Sale!
Defender 5 bar 3mm bonnet chequer plate, comes with oem Foam Gasket as per Land rover and all fixings. when it comes to chequer plate this is the highest quality on the market place. This is a 3 pcs kit. -
-
Defender 110 Crew Cab/side steps with chequer tread plate. These chunky sidesteps not only look great with an attractive checkerplate tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 110 crewcab also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Land Rover.- QuickTread brand – made in the UK.
- Bolt on design, no drilling required. Fitted in minutes.
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive checkerplate tread plate.
- Price is per pair.
- Full fitting instructions with diagrams included.
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- QuickTread means quick fitting – only 10-15 minutes per side*
- All Defender side steps have the option for zinc coating under the black powder coating to enhance durability & wear.
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
Call Us Today! +6012-220 5085|sales@defenderupgrades.com.my
