• DEFENDER REAR DOUBLE TOW STEP
    • Complete with socket mounting plate and bolts
    • L 71cm x W 16cm x H 5.5cm
    • Suits socket moutning plate MP3465B
    • Display packed
    • Dimensions (L x W x H): 71 cm x 16 x 5.5
    • Weight: 5.73 kg
  • DEFENDER HEAVY DUTY REAR TOW STEP DOUBLE
    • Heavy duty double rear towstep
    • Profiled treads provide extra grip
    • Towball mounting space 14cm
    • Complies with Reg55 requirements
    • Dimensions (L x W x H): 16.5 cm x 6 x 80
    • Weight: 7 kg
  • Defender 90 Aluminium Roof Rack Black roof racks are a sleek slimline design rack made from lightweight but strong aluminium with a tough high quality satin black powder coat finish. They weigh in at just 25kg. Defender upgrades have created a design on the extrusion to be more rounded to give a better aerodynamic look and feel to cause less drag. These Racks cause little wind resistance.......I know I had mine at over 70mph and it was very quiet!! Easy fitting using a robust clamping system for Land Rover Defender 90. This rack will also fit a Discovery 2. These roof racks are made from heat treated aluminium extrusions to ensure the optimum degree of flexibility and rigidity. They have a modular construction with an anodised powder coated aluminium frame mounted on powder coated feet. Modular construction with horizontal slats allows slats to be removed for sunroof access etc. The bars have a T slot system allowing a host of available accessories to be securely fitted to them, such as tents, lights, O-rings and a host of other accessories. Sleek slimline construction makes them ideal for expeditions, overlanding, roof tents, camping etc not forgetting they look spot on! They arrive flat packed for easy delivery and have all holes drilled for easy assembly (normally less than an hour). Dimensions when assembled are: 2200cm x 1400cm. Also Defender 110 rack available - Dimensions when assembled- 2800 x 1400 Other Accessories such as side rails, eye bolts, etc.... available email for details We can even colour code our racks to your vehicle for an additional £100 per rack Free fitting if required, so roll up and we will fit and you can drive away no packaging.
  • Defender 110 Aluminium Roof Rack Black are a sleek slimline design rack made from lightweight but strong aluminium with a tough high quality satin black powder coat finish. They weigh in at just 25kg. Defender upgrades have created a design on the extrusion to be more rounded to give a better aerodynamic look and feel to cause less drag. These Racks cause little wind resistance.......I know I had mine at over 70mph and it was very quiet!! Easy fitting using a robust clamping system for Land Rover Defender 90. the images are of a 90 but on the 110 you will get 4 feet per side and 3 additional horizontal slats These roof racks are made from heat treated aluminium extrusions to ensure the optimum degree of flexibility and rigidity. They have a modular construction with an anodised powder coated aluminium frame mounted on powder coated feet. Modular construction with horizontal slats allows slats to be removed for sunroof access etc. The bars have a T slot system allowing a host of available accessories to be securely fitted to them, such as tents, lights, O-rings and a host of other accessories. Sleek slimline construction makes them ideal for expeditions, overlanding, roof tents, camping etc not forgetting they look spot on! They arrive flat packed for easy delivery and have all holes drilled for easy assembly (normally less than an hour). Dimensions when assembled are: 2200cm x 1400cm. Also Defender 110 rack available - Dimensions when assembled- 2800 x 1400 Other Accessories such as side rails, eye bolts, etc.... available email for details We can even colour code our racks to your vehicle for an additional £100 per rack Free fitting if required, so roll up and we will fit and you can drive away no packaging.
  • Battery-Guard - Vehicle Battery monitoring via bluetooth
    With the Battery-Guard and Apple, Android or Windows App, you can now check your battery's state of charge quickly and easily. Because only with a fully charged vehicle battery can you be sure to avoid getting stuck. Works on 6, 12 and 24V DC systems with a power consumption of between 6 - 24 mW Installation is just 4 easy steps:
    1. Download the Battery-Guard App from the App Store, Google Play Store or from the Windows Store under "Battery-Guard". Compatible from iPhone 4S, Android 4.3 and Windows 10.
    2. Attach the Battery-Guard to the battery terminals. Fix the transmitter to the cleaned battery using the adhesive film provided.
    3. Activate Bluetooth on your smartphone and then open the App. Bluetooth search mode is not required.
    4. The transmitter appears in the list display. You can assign a name, an image and the rated voltage to the transmitter.
    Compatible as of iPhone 4S, Android 4.3 and Windows 10
  • 8 Litre Wavian Oil Drainage Container 8 Litre Wavian Oil Drainage Container
    Made from 1st Class HDPE and with a design in the shape of a funnel our Oil Drainage Container helps to collect the waste directly into the closable can, eliminating mess in your garage or workshop. Featured on the container are the three separate openings which aid in the filling and disposing of the waste. Use horizontally to fill from sump or drain plug and then store vertically. When emptying, open the large cap and use the vent plug to allow easy pouring. The Oil Drainage Container will make your oil change spill and fuss free, creating less mess than an open oil tray. Specifications: Height 11cm x Width 30cm x Depth 50cm Weight 1.8kg
  • Wildbear Discovery 2 LED  light winch Bumper is made from 5 mm Plate, shot blasted and primed and powder-coated in Black. Manufactured in the UK to the highest standard and Comes with Cree LEDS. The design of lights have change to square ones. shackle pins and recovery eyes are listed on other page.
    1. shot blasted and primed
    2. powder coated in black
    3. comes with led lights
    4. all fixings come with bumper to mount
    5. holes for shackle pins ( sold separate )
    6. hole pre drilled for water bottle guards that are also sold seperat
  • Shackle pins and towing eyes to suit all Wild Bear bumpers.
  • Number plate holder for Defender / Discovery / Range Rover Classic, if you recently purchased a new bumper and you don`t want to stick or drill your number plate on the front then use on of these relocation plates to allow you to use the existing fair lead holes to mount the number plate. Elongated holes allow you slacken off the bolts to fix the bracket.
  • Land rover defender twin drl bumper-Mild steel Made out of mild steel then powder coated in Textured black to give a quality look. The LED lights are Ring and the holes they are put in have been machine pressed so the light is slightly counter sunk so not flush. This really does enhance your defender to a more modern look.  
    • Powder coated in textured black
    • Ring Automotive lights
    • Comes with instructions to wire up
    • Mild Steel
  • Land Rover switch connector YPC10526 compatible with Puma Td4 MY2007 >
    • Air conditioning switch TDCi
    Defender Td5 2002 > 2006
    • Left Hand heated seat switch YUG102430
  • Land Rover switch connector YPC10525 compatible with Puma Td4 MY2007 >
    • Suitable for use with YUG000470LNF heated rear screen switch.
    Defender Td5 2002 > 2006
    • Suitable for use with YUG000470LNF heated rear screen switch
  • Land Rover switch connector YPC10523 compatible with Puma Td4 MY2007 >
    • Front fog light switch YUG000540LNF
    • Rear fog light switch
    • Heated seat switches YUF500150LNF
    Defender Td5 2002 > 2006
    • Right Hand heated seat switch YUG102440
    • Front fog light switch YUG000540LNF
    • Rear fog light switch
  • SEEKER-X LED With Integrated Front Position Lamp (Side Light) New to Range stylish looking led light. this is for one led lamp so will need to purchase 2 if you want a pair.   SEEKER-X 40W – 245mm With Integrated Front Position Lamp (Side Light)   Dimensions (mm):                             245 x 103 x 72 Voltage:                                                12/24V Multivolt Beam Type:                                          Driving Beam Approval:                                              ECE R112, R7, R10 Ingress Protection:                             IP68 Raw Lumens:                                      3520lm Current Draw (13.8 / 28V):             0.89A / 0.89A Housing                                               Heavy-Duty Aluminium Connector                                            Deutsch
  • Ring Rechargeable UNDER BONNET LAMP
    • 3 x 5W LEDs provide 1000 lumens light output
    • Long operating time allows full working day usage
    • 3 levels of light output
    • 6000K colour temperature for bright white light
    • 40º adjustable head to shine light on the engine bay exactly where it is required
    • 60º wide angle illumination
    • Sturdy polycarbonate, ABS and Aluminium construction
    • Rechargeable 3.7V 10400mAh Li-ion battery
    • Hook design allows usage with different vehicle types including, cars, vans and 4x4s
    • Illuminated battery status indicator
    • Includes AC mains adaptor
    Product Dimensions (mm): H 110  x  W 1200  x  D 120 Weight (kg): 2.196 Voltage: 5V DC Watts: 15W Battery Info:
    • Batteries Included
    • Type: RECHARGEABLE
    • 1 x CUSTOM
  • Rigid Industries 1x2 65° DC Scene Light prodcues 1100 raw lumens and features a vertical spread of 69° and a horizontal spread of 65°. Using the latest LED technology, all new patent pending optic system, minimal amp draw, and extreme output, the 1x2 65° Scene Light is the perfect area lighting solution. This versatile light can be mounted to your RV, toy hauler, tractor trailer, fire truck and can even be mounted to the undercarriage of your vehicle. Limited Lifetime Warranty. 1x2 65º DC Scene Light - Black Family     LED Scene Lighting By Rigid Industries Optics     Flood LED Color     Clear Finish Color     Black Mount Type     Surface Shipping Dimensions     5.75 × 4.875 × 2.375 in Product Weight     0.53 lb Sold As     Single Features
    • 65˚ Horizontal Spread X 69˚ Vertical Spread
    • Flat Mounting Surface
    • Available with Cool White or Amber LEDs
    • 9-36 V DC
    • IP68 Compliant
    • Powder Coated Aluminum Housing
    Specifications
    • Watts     9
    • Amp Draw     0.75
    • LED's     3
    • Raw Lumens     1100
    • Lux @ 10m     6.95
    • Beam Distance     26.4 m
    • Peak Beam Intensity     695 cd